Yamaha XTZ 660 Tenere - 1996 Specifications and Reviews

The 1996 Yamaha XTZ 660 Tenere is a versatile single-cylinder enduro designed for adventure riders seeking balanced on-road and off-road capability. Its torquey 659cc engine, manageable weight, and accessible seat height make it ideal for both experienced and intermediate riders tackling varied terrain. Known for reliability and practical performance, it remains a respected choice for touring and light trail exploration.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
Year1996
ModelYamaha XTZ 660 Tenere

Engine and Transmission Specifications

Transmission type,final driveChain
Gearbox5-speed
Valves per cylinder5
Torque57.00 Nm (5.8 kgf-m or 42.0 ft.lbs) @ 5250
Power48.00
Engine typeSingle cylinder, four-stroke
Capacity:659.00 ccm (40.21 cubic inches)
 
 

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
 
 

Physical measures and capacities

Seat height865 mm (34.1 inches) If adjustable, lowest setting.
Power/weight ratio0.2807 HP/kg
Dry weight171.0 kg (377.0 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

46 hp
Peak Power
6s
0-60 mph

Best For

Track20%
City45%
Cornering50%
Daily Riding55%
Touring75%
Passenger40%

Rider Profile

Best ForSuits riders with at least some experience, particularly those new to tall, single-cylinder adventure bikes who are comfortable with a high seat height and off-road-biased handling.
PurposeBuilt primarily for long-distance off-road adventure and dual-sport travel rather than outright speed or cornering performance.
Rider FitThe tall 865mm seat height and 201kg weight demand reasonable rider height and confidence handling a top-heavy bike at low speeds or off-road.
CharacterA rugged, torquey single-cylinder workhorse that rewards patient, momentum-based riding over aggressive throttle inputs.
Not Ideal ForNot a good fit for riders seeking sharp sport-bike acceleration, low seat height, or nimble city commuting.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

1996 Yamaha XTZ 660 Tenere Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 865mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 1996 Yamaha XTZ 660 Tenere, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.