What category is the 2010 Hartford VR-125Z?

General information
Category	Enduro / offroad
Model	Hartford VR-125Z
Year	2010
Engine and Transmission Specifications
Transmission type,final drive	Chain
Gearbox	5-speed
Cooling system	Air
Ignition	CDI
Bore x stroke	56.5 x 49.5 mm (2.2 x 1.9 inches)
Compression	9.0:1
Torque	7.86 Nm (0.8 kgf-m or 5.8 ft.lbs) @ 76000
Power	10.40
Engine type	Single cylinder, four-stroke
Capacity:	124.00 ccm (7.57 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	110/90-18
Front tyre dimensions	90/90-118
Physical measures and capacities
Fuel capacity	12.00 litres (3.17 gallons)
Wheelbase	1,375 mm (54.1 inches)
Overall width	880 mm (34.6 inches)
Overall length	2,110 mm (83.1 inches)
Overall height	1,170 mm (46.1 inches)
Seat height	810 mm (31.9 inches) If adjustable, lowest setting.
Power/weight ratio	0.0743 HP/kg
Dry weight	140.0 kg (308.6 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Black/Silver, Red
Starter	Electric

Performance Profile & Rider Fit

14 hp

Peak Power

Best For

Track20%

City65%

Cornering45%

Daily Riding55%

Touring20%

Passenger25%

Rider Profile

Best For	This bike suits beginners or new riders looking for a light, unintimidating machine to build confidence on.
Purpose	It's best suited to short commutes and casual around-town riding rather than any serious sporting or long-distance use.
Rider Fit	Its low weight and modest seat height make it very manageable for smaller or less experienced riders.
Character	It has the styling cues of a sport bike but the heart of a small, economical commuter, prioritizing approachability over performance.
Not Ideal For	It's not a good match for experienced riders seeking real power, highway touring comfort, or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Hartford VR-125Z Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 810mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Hartford VR-125Z, with a cramped knee angle of around 70 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →