Hartford HD-200S - 2008 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategorySport
ModelHartford HD-200S
Year2008

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox5-speed
Cooling systemAir
IgnitionCDI
Bore x stroke63.5 x 62.2 mm (2.5 x 2.4 inches)
Compression9.0:1
Torque14.78
Power14.30
Stroke4
Engine typeSingle cylinder
Capacity:197.00 ccm (12.02 cubic inches)

Physical measures and capacities

Wheelbase1,320 mm (52.0 inches)
Overall width810 mm (31.9 inches)
Overall length1,940 mm (76.4 inches)
Overall height1,050 mm (41.3 inches)
Seat height860 mm (33.9 inches) If adjustable, lowest setting.
Dry weight130.0 kg (286.6 pounds)
 
 

Hartford HD-200S dimensions and frame

Rear brakesSingle disc
Front brakesSingle disc
Rear tyre dimensions130/90-18
Front tyre dimensions90/90-18

Speed and acceleration

Power/weight ratio0.1100 HP/kg
 
 

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsBlack
Fuel capacity9.00 litres (2.38 gallons)

Performance Profile & Rider Fit

14.3 hp
Peak Power (est.)
12.5s
0-60 mph (est.)

Best For

Track10%
City75%
Cornering45%
Daily Riding70%
Touring20%
Passenger35%

Rider Profile

Best ForIdeal for beginners and newly licensed riders; its modest 14hp single is forgiving and easy to manage.
PurposeA lightweight small-capacity commuter and learner bike for urban riding and short everyday trips.
Rider FitLight 130kg dry with a tall 860mm seat and slim, upright ergonomics; roomy for its class but demands longer legs.
CharacterA humble, no-frills air-cooled single with 'sport' styling but gentle, economical real-world performance.
Not Ideal ForNot for experienced riders wanting speed, highway touring, two-up loads, or genuine off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2008 Hartford HD-200S Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2008 Hartford HD-200S, with a cramped knee angle of around 75 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.