What category is the 2012 Hartford VR-125H?

General information
Category	Enduro / offroad
Model	Hartford VR-125H
Year	2012
Engine and Transmission Specifications
Transmission type,final drive	Chain
Gearbox	5-speed
Cooling system	Air
Ignition	CDI
Bore x stroke	56.5 x 49.5 mm (2.2 x 1.9 inches)
Compression	9.0:1
Torque	8.67 Nm (0.9 kgf-m or 6.4 ft.lbs) @ 7000
Power	11.00
Engine type	Single cylinder, four-stroke
Capacity:	124.00 ccm (7.57 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	110/90-18
Front tyre dimensions	2.75-21

Physical measures and capacities
Fuel capacity	12.00 litres (3.17 gallons)
Wheelbase	1,375 mm (54.1 inches)
Overall width	880 mm (34.6 inches)
Overall length	2,190 mm (86.2 inches)
Overall height	1,240 mm (48.8 inches)
Seat height	860 mm (33.9 inches) If adjustable, lowest setting.
Power/weight ratio	0.0887 HP/kg
Dry weight	124.0 kg (273.4 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Black/Silver, Red/Silver, Purple/White

Performance Profile & Rider Fit

11 hp

Peak Power

Best For

Track15%

City65%

Cornering45%

Daily Riding55%

Touring25%

Passenger25%

Rider Profile

Best For	This bike is best suited to beginners or learner-licence riders taking their first steps into motorcycling.
Purpose	It's designed as a lightweight, low-powered sport-styled commuter for short trips and everyday runabouts rather than serious performance riding.
Rider Fit	The 860mm seat height and 124kg dry weight make it very manageable for shorter or lighter riders and easy to handle at low speeds.
Character	Despite its sporty styling with a 21-inch front wheel, it behaves more like a friendly, unintimidating small-capacity all-rounder than a genuine sportbike.
Not Ideal For	This isn't the right bike for experienced riders seeking real speed, highway touring comfort, or a capable off-road machine.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2012 Hartford VR-125H Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2012 Hartford VR-125H, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →