What category is the 2012 Enfield Classic 500?

General information
Category	Classic
Model	Enfield Classic 500
Year	2012
Engine and Transmission Specifications
Clutch	Mulitiplate in oil
Transmission type,final drive	Chain
Gearbox	5-speed
Cooling system	Air
Lubrication system	Dry sump
Ignition	Electronic Ignition
Fuel control	OHV
Fuel system	Injection
Bore x stroke	84.0 x 90.0 mm (3.3 x 3.5 inches)
Compression	8.5:1
Torque	41.30 Nm (4.2 kgf-m or 30.5 ft.lbs) @ 4000
Power	27.20
Engine type	Single cylinder, four-stroke
Capacity:	499.00 ccm (30.45 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Front brakes	Single disc
Rear suspension travel	80 mm (3.1 inches)
Rear suspension	Swing arm with adjustable Gas filled shock absorber
Front suspension travel	130 mm (5.1 inches)
Front suspension	Telescopic, Hydraulic damping
Physical measures and capacities
Fuel capacity	13.50 litres (3.57 gallons)
Wheelbase	1,370 mm (53.9 inches)
Ground clearance	140 mm (5.5 inches)
Overall width	800 mm (31.5 inches)
Overall length	2,130 mm (83.9 inches)
Overall height	1,050 mm (41.3 inches)
Seat height	800 mm (31.5 inches) If adjustable, lowest setting.
Power/weight ratio	0.1495 HP/kg
Dry weight	182.0 kg (401.2 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Green, red, black
Starter	Kick

Performance Profile & Rider Fit

27.2 hp

Peak Power

9.5s

0-60 mph

Best For

Track10%

City60%

Cornering35%

Daily Riding55%

Touring45%

Passenger45%

Rider Profile

Best For	Well suited to new and returning riders thanks to its mild power delivery and forgiving, low-stress nature.
Purpose	Built for relaxed classic-styled cruising and short-to-medium rides rather than outright performance.
Rider Fit	A manageable, moderately heavy machine with a low seat and easy reach that suits most rider sizes.
Character	A charming, retro-styled thumper that rewards a leisurely riding style with soulful engine character over speed.
Not Ideal For	Not for riders seeking quick acceleration, sharp handling, or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2012 Enfield Classic 500 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 800mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2012 Enfield Classic 500, with a relaxed knee angle of around 120 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →