What category is the 2000 Triumph Daytona 955I?

General information
Category	Sport
Model	Triumph Daytona 955i
Year	2000
Engine and Transmission Specifications
Greenhouse gases	13.7 CO
Fuel consumption	0.59 litres/100 km (169.5 km/l or 398.68 mpg)
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Fuel system	Injection
Valves per cylinder	4
Bore x stroke	79.0 x 65.0 mm (3.1 x 2.6 inches)
Compression	11.2:1
60-140 km/h (37-87 mph), highest gear	8.800 seconds
0-100 km/h (0-62 mph)	3.100 seconds
Top speed	253.0 km/h (157.2 mph)
Torque	100.00 Nm (10.2 kgf-m or 73.8 ft.lbs) @ 7500
Power	128.00
Engine type	In-line three, four-stroke
Capacity:	956.00 ccm (58.34 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes diameter	220 mm (8.7 inches)
Rear brakes	Single disc
Front brakes diameter	320 mm (12.6 inches)
Front brakes	Dual disc
Rear tyre dimensions	190/50-ZR17
Front tyre dimensions	120/70-ZR17
Rear suspension travel	140 mm (5.5 inches)
Front suspension travel	120 mm (4.7 inches)

Physical measures and capacities
Fuel capacity	18.00 litres (4.76 gallons)
Wheelbase	1,440 mm (56.7 inches)
Seat height	820 mm (32.3 inches) If adjustable, lowest setting.
Front percentage of weight	49.4
Weight incl. oil, gas, etc	224.0 kg (493.8 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric

Performance Profile & Rider Fit

149 hp

Peak Power

3.2s

0-60 mph

157.2 mph

Top Speed

Best For

Track82%

City45%

Cornering88%

Daily Riding50%

Touring42%

Passenger35%

Rider Profile

Best For	This is a machine best suited to intermediate and experienced riders who are comfortable with a high-revving, powerful triple and committed sportbike ergonomics.
Purpose	Built primarily for spirited road riding and canyon carving, with genuine track-day capability thanks to its aluminum perimeter frame and sharp geometry.
Rider Fit	The low, forward-leaning riding position and firm suspension demand decent core strength and wrist tolerance, especially on longer rides.
Character	The 955i in-line three delivers a distinctive, torque-rich growl and mid-range punch that gives it a more characterful feel than typical four-cylinder sport rivals.
Not Ideal For	This is not the right bike for new riders, tall touring distances with a passenger, or anyone seeking a relaxed, upright commuting experience.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2000 Triumph Daytona 955I Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 820mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2000 Triumph Daytona 955I, with a cramped knee angle of around 70 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →