Xispa EnduCross 50X4T - 2010 Specifications and Reviews

The 2010 Xispa EnduCross 50x4T is a lightweight enduro machine designed for young riders and beginners seeking off-road adventure. Its air-cooled four-stroke engine delivers modest power ideal for learning fundamental trail skills. Known for its simplicity and durability, this model excels in accessible terrain and youth training applications.

2010
Not Rated stars Average rating: Not Rated from 0 votes
.

Engine and Transmission Specifications

Exhaust systemEuro I/Euro II
Transmission type,final driveChain
Gearbox1-speed
Cooling systemAir
Fuel systemCarburettor
Power4.55
Engine typeSingle cylinder, four-stroke
Capacity:49.90 ccm (3.04 cubic inches)

CategoryEnduro / offroad
Year2010
ModelXispa EnduCross 50x4T

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
Rear suspensionEBR Monoshock
Front suspensionTelescopi fork
 
 

Physical measures and capacities

Wheelbase1,060 mm (41.7 inches)
Overall height790 mm (31.1 inches)
Seat height740 mm (29.1 inches) If adjustable, lowest setting.
 
 

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

4.6 hp
Peak Power (est.)

Best For

Track5%
City15%
Cornering20%
Daily Riding10%
Touring5%
Passenger0%

Rider Profile

Best ForThis is a beginner-level minibike, best suited to young or novice riders taking their first steps off-road rather than experienced adults.
PurposeIt is built as a small-capacity enduro-style trainer bike for casual dirt play and learning basic off-road skills, not for serious trail riding or competition.
Rider FitThe low seat height and lightweight, minimal-power nature make it very accessible and unintimidating for smaller or lighter riders.
CharacterIts single-cylinder four-stroke engine and single-speed gearbox give it a simple, forgiving, low-stress riding character focused on control rather than performance.
Not Ideal ForIt is not suitable for adult-sized riders, highway use, touring, or anyone seeking real speed or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Xispa EnduCross 50X4T Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 740mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Xispa EnduCross 50X4T, with a cramped knee angle of around 60 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.