Victory Vision Tour - 2013 Specifications and Reviews

The 2013 Victory Vision Tour is a full-featured cruiser-touring motorcycle built for long-distance riders seeking comfort and reliability. Powered by a 1737cc V-twin engine with electronic fuel injection, it delivers smooth cruising performance via a six-speed transmission. The Vision Tour is best known for its spacious seating, integrated windscreen, and touring-oriented chassis that handles highway miles effortlessly.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryTouring
Year2013
ModelVictory Vision Tour

Engine and Transmission Specifications

Exhaust systemSplit dual exhaust with crossover
DrivelineCarbon Fiber Reinforced Belt. Primary drive: Gear drive with torque compensator.
ClutchWet, multi-plate
Transmission type,final driveBelt
Gearbox6-speed
Cooling systemOil & air
Fuel controlSOHC
Fuel systemInjection. Electronic Fuel Injection with dual 45mm throttle body
Valves per cylinder4
Bore x stroke101.0 x 108.0 mm (4.0 x 4.3 inches)
Compression9.4:1
Torque12.00 Nm (1.2 kgf-m or 8.9 ft.lbs)
Engine detailsSelf-adjusting cam chains, hydraulic lifters
Engine typeV2, four-stroke
Capacity:1737.14 ccm (106.00 cubic inches)

Brakes, suspension, Frame and wheels

WheelsDunlop Elite 3 tires
Rear brakes diameter300 mm (11.8 inches)
Rear brakesSingle disc. Floating rotor with 2-piston caliper. ABS.
Front brakes diameter300 mm (11.8 inches)
Front brakesDouble disc. Floating rotor with 4-piston calipers. ABS.
Rear tyre dimensions180/60-R16
Front tyre dimensions130/70-R18
Rear suspensionSingle, mono-tube, cast aluminum with constant-rate linkage, 3.65 in / 92.7 mm travel, air adjustable
Front suspensionConventional telescopic fork, 46 mm diameter, 5.1 in / 130 mm travel
Trail142 mm (5.6 inches)
Rake (fork angle)29.0°
 
 

Physical measures and capacities

Oil capacity4.70 litres (0.31 quarts)
Fuel capacity22.71 litres (6.00 gallons)
Wheelbase1,669 mm (65.7 inches)
Ground clearance122 mm (4.8 inches)
Overall length2,629 mm (103.5 inches)
Seat height673 mm (26.5 inches) If adjustable, lowest setting.
Dry weight394.2 kg (869.0 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
CommentsWindscreen
Color optionsSunset Red and Black w/ Black Carbon Graphics, Bronze Mist and Sandstone Metallic, Solid Black.
Carrying capacity29 Gallons of trunc and saddle bags space
Electrical12 volts / 18 amp hours battery.

Performance Profile & Rider Fit

5.5s
0-60 mph (est.)

Best For

Track10%
City30%
Cornering35%
Daily Riding55%
Touring97%
Passenger95%

Rider Profile

Best ForBest suited to experienced riders comfortable managing a very heavy, long-wheelbase machine at low speeds and in parking maneuvers.
PurposeBuilt for effortless long-distance highway touring with a passenger and luggage rather than sporty riding.
Rider FitRequires reasonable strength and confidence to hold up and maneuver its substantial weight, though the low seat height helps shorter riders get feet down.
CharacterA big-torque cruiser-tourer that rewards a relaxed, smooth riding style with plush comfort and strong straight-line stability.
Not Ideal ForNot for riders seeking sharp cornering agility, off-road capability, or a lightweight, flickable city bike.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2013 Victory Vision Tour Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 673mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2013 Victory Vision Tour, with a cramped knee angle of around 75 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

⚠ Safety Recalls (1)

EQUIPMENT Sep 2012 · 12V457000

Polaris is recalling certain model year 2012-2013 Victory motorcycles manufactured from January 3, 2012, through August 15, 2012. A torqueing procedure may have been missed on some throttle cable retention nuts. On certain motorcycles, the throttle cable retention nuts for either the pull or push throttle cable may have not been torqued correctly.

Risk: If the torqueing is missed and the retention nuts are loose, the retention nuts closest to the throttle body can become dislodged and interfere with the throttle function, increasing the risk of a crash.

Remedy: Victory will notify owners and dealers will correctly torque the fasteners free of charge. The safety recall began on October 4, 2012. Owners may contact Victory consumer service department by calling 1-888-704-5290.

Source: NHTSA. View all Victory recalls →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.