What category is the 2014 Victory Hammer S?

General information
Category	Custom / cruiser
Model	Victory Hammer S
Year	2014

Engine and Transmission Specifications
Exhaust system	Staggered slash-cut dual exhaust with crossover
Driveline	Carbon Fiber Reinforced Belt. Primary drive: Gear drive with torque compensator.
Clutch	Wet, multi-plate
Transmission type,final drive	Belt
Gearbox	6-speed
Cooling system	Oil & air
Fuel control	SOHC
Fuel system	Injection. Electronic Fuel Injection with dual 45mm throttle body
Valves per cylinder	4
Compression	9.4:1
Torque	153.23 Nm (15.6 kgf-m or 113.0 ft.lbs)
Power	97.00
Engine details	50 degree V-Twin. Self-adjusting cam chains, hydraulic lifters.
Engine type	V2, four-stroke
Capacity:	1737.14 ccm (106.00 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes diameter	300 mm (11.8 inches)
Rear brakes	Single disc. Floating rotor with 2-piston caliper
Front brakes diameter	300 mm (11.8 inches)
Front brakes	Double disc. Floating rotor with 4-piston calipers
Rear tyre dimensions	250/40-R18
Front tyre dimensions	130/70-R18
Rear suspension	Single, mono-tube gas, cast aluminum with rising rate linkage, 3.9 in / 100 mm travel, preload adjustable spring
Front suspension	Inverted cartridge telescopic fork, 43 mm diameter, 5.1 in / 130 mm travel
Rake (fork angle)	32.7°
Physical measures and capacities
Oil capacity	4.70 litres (0.31 quarts)
Fuel capacity	17.03 litres (4.50 gallons)
Wheelbase	1,669 mm (65.7 inches)
Ground clearance	147 mm (5.8 inches)
Overall length	2,365 mm (93.1 inches)
Seat height	673 mm (26.5 inches) If adjustable, lowest setting.
Power/weight ratio	0.3182 HP/kg
Dry weight	304.8 kg (672.0 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Suede Black and Indy Red, Fireball Red and White Lightening w/Graphics
Electrical	12 volts / 18 amp hours battery.

Performance Profile & Rider Fit

97 hp

Peak Power

4.2s

0-60 mph

Best For

Track20%

City45%

Cornering40%

Daily Riding55%

Touring55%

Passenger45%

Rider Profile

Best For	This power cruiser suits an intermediate to experienced rider comfortable with a heavy, torque-laden machine and a fat rear tire that demands deliberate steering input.
Purpose	Built for muscular boulevard cruising and straight-line torque thrills rather than corner carving or long-distance touring.
Rider Fit	A low seat height makes it approachable for shorter riders, but the substantial 305 kg weight requires solid low-speed balance and strength when maneuvering at a stop.
Character	It has a brawny, aggressive personality defined by big V-twin torque, a wide rear tire stance, and a stripped-down muscle cruiser attitude.
Not Ideal For	This is not the right bike for riders seeking agile cornering, off-road capability, or a lightweight, flickable ride.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2014 Victory Hammer S Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 673mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2014 Victory Hammer S, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →