Johnny Pag Barhog - 2010 Specifications and Reviews

The 2010 Johnny Pag Barhog is a 300cc custom cruiser designed for riders seeking affordable, accessible cruiser styling with practical performance. Its compact twin-cylinder engine delivers modest power ideal for beginners and commuters, while the five-speed transmission and liquid cooling ensure reliable everyday usability. Known for budget-friendly cruiser aesthetics, it appeals to entry-level enthusiasts wanting classic motorcycle character without premium pricing.

2010
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryCustom / cruiser
Year2010
ModelJohnny Pag Barhog
 
 

Engine and Transmission Specifications

Greenhouse gases83.8 CO
Fuel consumption3.61 litres/100 km (27.7 km/l or 65.16 mpg)
Gearbox5-speed
Cooling systemLiquid
Lubrication systemForced Lubrication
Fuel controlDOHC
Fuel systemCarburettor. Dual 26mm Keihin Vacuum Carburetor
Valves per cylinder2
Bore x stroke57.0 x 53.0 mm (2.2 x 2.1 inches)
Compression10.2:1
Torque18.50 Nm (1.9 kgf-m or 13.6 ft.lbs) @ 6500
Power23.80
Engine typeTwin, four-stroke
Capacity:300.00 ccm (18.31 cubic inches)
 
 

Brakes, suspension, Frame and wheels

Rear brakesSingle disc. 2-piston
Front brakesDouble disc. 2-piston
Rear tyre dimensions160/90-18
Front tyre dimensions90/90-21
Rear suspensionDual shocks, fully-adjustable.
Front suspension39 mm conventional forks
Rake (fork angle)36.0°

Physical measures and capacities

Wheelbase1,626 mm (64.0 inches)
Ground clearance152 mm (6.0 inches)
Seat height610 mm (24.0 inches) If adjustable, lowest setting.

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsBlack

Performance Profile & Rider Fit

23.8 hp
Peak Power
12.5s
0-60 mph

Best For

Track10%
City55%
Cornering30%
Daily Riding50%
Touring30%
Passenger30%

Rider Profile

Best ForThis small-capacity cruiser is well suited to new or returning riders who want cruiser styling without intimidating power.
PurposeIt's built for casual, low-speed cruising and boulevard riding rather than performance or long-distance touring.
Rider FitThe low 610mm seat height and long wheelbase make it accessible to shorter riders and easy to flat-foot at stops.
CharacterIt has a laid-back, classic cruiser feel with modest torque delivery and relaxed, unhurried acceleration.
Not Ideal ForIt is not for riders seeking highway-passing power, aggressive cornering ability, or serious off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Johnny Pag Barhog Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 610mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Johnny Pag Barhog, with a cramped knee angle of around 65 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.