Johnny Pag Ventura 320I - 2013 Specifications and Reviews

The 2013 Johnny Pag Ventura 320i is a lightweight custom cruiser powered by a fuel-injected 320cc twin-stroke engine producing 22 horsepower. Ideal for budget-conscious riders seeking an affordable entry-level cruiser with retro styling, it delivers practical performance with a top speed of 170.6 km/h and manageable handling characteristics.

2013
4 stars Average rating: 4 from 1 votes
.

General information

CategoryCustom / cruiser
Year2013
ModelJohnny Pag Ventura 320i
 
 

Engine and Transmission Specifications

Exhaust systemStainless Steel
Greenhouse gases80.3 CO
Fuel consumption3.46 litres/100 km (28.9 km/l or 67.98 mpg)
Gearbox5-speed
Cooling systemLiquid
Lubrication systemForced Lubrication
Fuel controlSOHC
Fuel systemInjection. EFI
Valves per cylinder2
Bore x stroke53.0 x 62.0 mm (2.1 x 2.4 inches)
Compression10.5:1
Top speed170.6 km/h (106.0 mph)
Power22.00
Engine typeTwin, four-stroke
Capacity:320.00 ccm (19.53 cubic inches)

Brakes, suspension, Frame and wheels

WheelsStainless Steel Spoked rims with T6 6061 billet hubs
Rear brakesSingle disc. 2-piston
Front brakesDouble disc. 2-piston
Rear tyre dimensions140/70-18
Front tyre dimensions90/90-21
Front suspensionTelescopic fork, 39 mm
Rake (fork angle)35.0°
Frame typeSeamless steel tubing

Physical measures and capacities

Fuel capacity7.95 litres (2.10 gallons)
Wheelbase1,676 mm (66.0 inches)
Seat height610 mm (24.0 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc185.1 kg (408.0 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsBlack
Factory warranty12 months
StarterElectric

Performance Profile & Rider Fit

22 hp
Peak Power
11.5s
0-60 mph
106 mph
Top Speed

Best For

Track10%
City60%
Cornering35%
Daily Riding55%
Touring30%
Passenger30%

Rider Profile

Best ForThis small-capacity cruiser is well suited to beginners and riders wanting a low-stress, low-power introduction to cruiser styling.
PurposeIt's built for relaxed, low-speed cruising and casual around-town riding rather than performance or long-distance touring.
Rider FitThe low 610 mm seat height and light 185 kg weight make it very manageable for shorter or less experienced riders.
CharacterIt offers classic cruiser looks with a soft, easygoing power delivery from its small twin-cylinder engine.
Not Ideal ForIt's not for riders seeking highway touring comfort, high speed, passenger-heavy trips, or any off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2013 Johnny Pag Ventura 320I Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 610mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2013 Johnny Pag Ventura 320I, with a cramped knee angle of around 65 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.