Highland Allroad - 2006 Specifications and Reviews

The 2006 Highland Allroad is a versatile 936cc V-twin enduro designed for riders seeking adventure both on and off-road. Its potent fuel-injected engine delivers strong mid-range torque ideal for varied terrain, while the sophisticated liquid-cooled four-stroke platform ensures reliable performance across diverse riding conditions. Best known for balancing rugged capability with practical everyday usability.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
Year2006
ModelHighland Allroad

Engine and Transmission Specifications

Transmission type,final driveChain
Gearbox6-speed
Cooling systemLiquid
Fuel controlDOHC
Fuel systemInjection
Valves per cylinder4
Bore x stroke95.0 x 66.0 mm (3.7 x 2.6 inches)
Compression11.1:1
Top speed200.0 km/h (124.3 mph)
Torque104.00 Nm (10.6 kgf-m or 76.7 ft.lbs) @ 4000
Power83.81
Engine typeV2, four-stroke
Capacity:936.00 ccm (57.11 cubic inches)
 
 

Brakes, suspension, Frame and wheels

Rear brakes diameter260 mm (10.2 inches)
Rear brakesSingle disc. Bremo
Front brakes diameter320 mm (12.6 inches)
Front brakesSingle disc. Bremo
Rear suspension travel280 mm (11.0 inches)
Rear suspensionOhlins
Front suspension travel280 mm (11.0 inches)
Front suspensionMarzocchi.
Rake (fork angle)26.0°
Frame typeCrMo
 
 

Physical measures and capacities

Fuel capacity20.00 litres (5.28 gallons)
Wheelbase1,500 mm (59.1 inches)
Seat height720 mm (28.3 inches) If adjustable, lowest setting.
Power/weight ratio0.5110 HP/kg
Dry weight164.0 kg (361.6 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
StarterElectric

Performance Profile & Rider Fit

85 hp
Peak Power
3.8s
0-60 mph
124.3 mph
Top Speed

Best For

Track60%
City55%
Cornering85%
Daily Riding50%
Touring55%
Passenger30%

Rider Profile

Best ForThis is a machine for experienced riders, given its huge single-cylinder torque, tall ground clearance, and light but powerful supermoto-style character.
PurposeBuilt as an aggressive allround/supermoto-adventure hybrid, it excels at fast, technical riding on twisty roads, gravel, and mixed terrain rather than pure highway cruising.
Rider FitThe tall, narrow, lightweight chassis and long suspension travel favor riders who are confident standing on the pegs and comfortable with a high seat height.
CharacterExpect a raw, punchy, mechanical riding experience with strong low-end torque, sharp handling, and a focused, no-frills cockpit.
Not Ideal ForThis is not the right bike for riders seeking plush two-up touring comfort, wind protection, or a relaxed, low-effort daily commuter.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2006 Highland Allroad Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 720mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2006 Highland Allroad, with a cramped knee angle of around 60 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.