What category is the 2009 Hartford VR-200X?

General information
Category	Enduro / offroad
Model	Hartford VR-200X
Year	2009

Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	5-speed
Cooling system	Air
Starter	Electric
Ignition	CDI
Bore x stroke	63.5 x 62.2 mm (2.5 x 2.4 inches)
Compression	9.0:1
Torque	14.78
Power	14.30
Stroke	4
Engine type	Single cylinder
Capacity:	197.00 ccm (12.02 cubic inches)
Physical measures and capacities
Overall width	850 mm (33.5 inches)
Overall length	2,115 mm (83.3 inches)
Overall height	860 mm (33.9 inches)
Seat height	860 mm (33.9 inches) If adjustable, lowest setting.
Dry weight	139.0 kg (306.4 pounds)

Hartford VR-200X dimensions and frame
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	130/80-17
Front tyre dimensions	110/80-17
Speed and acceleration
Power/weight ratio	0.1029 HP/kg
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Red
Fuel capacity	12.00 litres (3.17 gallons)

Performance Profile & Rider Fit

19.2 hp

Peak Power

11.5s

0-60 mph

Best For

Track25%

City65%

Cornering55%

Daily Riding55%

Touring25%

Passenger25%

Rider Profile

Best For	This bike suits beginner to early-intermediate riders who want a light, non-intimidating machine to build skills on.
Purpose	It's best suited to short commutes, learning to ride, and casual sport-styled runs rather than serious performance riding.
Rider Fit	Its low seat height and light dry weight make it very manageable for shorter or less physically strong riders.
Character	The single-cylinder engine and modest output give it a docile, approachable character rather than a thrilling sporty edge.
Not Ideal For	It's not a good fit for experienced riders seeking real straight-line speed, extended highway touring, or off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2009 Hartford VR-200X Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2009 Hartford VR-200X, with a cramped knee angle of around 75 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →