What category is the 2010 Hartford HD-200S?

General information
Category	Sport
Model	Hartford HD-200S
Year	2010
Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	5-speed
Cooling system	Air
Ignition	CDI
Bore x stroke	63.5 x 62.2 mm (2.5 x 2.4 inches)
Compression	9.0:1
Torque	14.78
Power	14.30
Stroke	4
Engine type	Single cylinder
Capacity:	197.00 ccm (12.02 cubic inches)

Physical measures and capacities
Wheelbase	1,320 mm (52.0 inches)
Overall width	810 mm (31.9 inches)
Overall length	1,940 mm (76.4 inches)
Overall height	1,050 mm (41.3 inches)
Seat height	860 mm (33.9 inches) If adjustable, lowest setting.
Dry weight	130.0 kg (286.6 pounds)

Hartford HD-200S dimensions and frame
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	130/90-18
Front tyre dimensions	90/90-18
Speed and acceleration
Power/weight ratio	0.1100 HP/kg
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Black
Fuel capacity	9.00 litres (2.38 gallons)

Performance Profile & Rider Fit

14.3 hp

Peak Power (est.)

12.5s

0-60 mph (est.)

Best For

Track10%

City75%

Cornering45%

Daily Riding70%

Touring20%

Passenger35%

Rider Profile

Best For	Ideal for beginners and newly licensed riders; its modest 14hp single is forgiving and easy to manage.
Purpose	A lightweight small-capacity commuter and learner bike for urban riding and short everyday trips.
Rider Fit	Light 130kg dry with a tall 860mm seat and slim, upright ergonomics; roomy for its class but demands longer legs.
Character	A humble, no-frills air-cooled single with 'sport' styling but gentle, economical real-world performance.
Not Ideal For	Not for experienced riders wanting speed, highway touring, two-up loads, or genuine off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Hartford HD-200S Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2010 Hartford HD-200S, with a cramped knee angle of around 75 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →