What category is the 2013 Benelli Velvet 150?

General information
Category	Scooter
Model	Benelli Velvet 150
Year	2013
Engine and Transmission Specifications
Exhaust system	With catalytic converter
Driveline	Primary V-bet, final gears
Clutch	Automatic centrifugal
Cooling system	Air
Ignition	Electronic
Fuel control	OHC
Fuel system	Carburettor. PD26JC
Valves per cylinder	2
Compression	12.0:1
Engine details	Horizontal cylinder
Engine type	Single cylinder, four-stroke
Capacity:	152.00 ccm (9.28 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes diameter	220 mm (8.7 inches)
Rear brakes	Single disc
Front brakes diameter	220 mm (8.7 inches)
Front brakes	Single disc
Rear tyre dimensions	140/70-R13
Front tyre dimensions	120/70-R13
Rear suspension	Floating engine with double hydraulic rear dumper
Front suspension	Hydraulic telescopic fork
Frame type	steel, Trellis frame

Physical measures and capacities
Fuel capacity	11.70 litres (3.09 gallons)
Wheelbase	1,400 mm (55.1 inches)
Overall length	1,910 mm (75.2 inches)
Seat height	818 mm (32.2 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	129.0 kg (284.4 pounds)
Dry weight	122.0 kg (269.0 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Electrical	12V 10Ah battery
Starter	Electric & kick

Performance Profile & Rider Fit

10.6 hp

Peak Power

Best For

Track5%

City82%

Cornering40%

Daily Riding75%

Touring28%

Passenger35%

Rider Profile

Best For	This scooter suits new and casual riders looking for simple, low-stress transportation without the demands of a manual gearbox.
Purpose	It's built primarily for short urban commutes and errands rather than performance or long-distance riding.
Rider Fit	The low seat height and automatic transmission make it accessible and easy to manage for riders of most sizes and experience levels.
Character	A practical, unassuming city scooter with modest power that prioritizes convenience and maneuverability over excitement.
Not Ideal For	This is not the right choice for riders seeking highway touring capability, passenger comfort on long trips, or any kind of off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2013 Benelli Velvet 150 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 818mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2013 Benelli Velvet 150, with a moderate knee angle of around 105 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →