What category is the 2022 Zero Engineering Type 5?

General information
Category	Classic
Model	Zero Engineering Type 5
Year	2022
Engine and Transmission Specifications
Driveline	HD transmission.
Clutch	Wet multiplate coil spring
Transmission type	Chain (final drive)
Gearbox	5-speed
Cooling system	Air
Fuel control	Overhead Valves (OHV)
Fuel system	Carburettor. Injection in Japan and Europe
Valves per Cylinder	4
Engine type	V2, four-stroke
Capacity:	1570.0 ccm (95.80 cubic inches)

Brakes, suspension, Frame and wheels
Seat	Single person leather seat, various colors
Rear brakes	Single disc. Hydraulic
Front brakes	Single disc. Hydraulic
Rear tire	5.00-16
Front tire	5.00-16
Front Suspension	Zero Engineering Springer
Rake (fork angle)	33.2°
Frame type	Rigid gooseneck
Physical measures and capacities
Oil capacity	2.80 litres (2.96 US quarts)
Fuel capacity	8.40 litres (2.22 US gallons)
Wheelbase	1600 mm (63.0 inches)
Ground clearance	100 mm (3.9 inches)
Overall width	720 mm (28.3 inches)
Overall length	2300 mm (90.6 inches)
Overall height	930 mm (36.6 inches)
Seat height	660 mm (26.0 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	250.0 kg (551.2 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	Model ID: JRK (US Type5). Sold in the US. Slighly other versions for models sold in EU and Japan. Zero Engineering is a Japanese brand. Various customizing options.
Instruments	Compact analogue
Starter	Electric
Color options	Real Black, Pearl white, Dark green

Performance Profile & Rider Fit

14.5 hp

Peak Power

12.5s

0-60 mph

Best For

Track15%

City75%

Cornering45%

Daily Riding65%

Touring30%

Passenger25%

Rider Profile

Best For	Note: the specifications provided are for a Zontes ZT125-G1 Scrambler, not the named Zero Engineering Type 5, so this profile reflects that small-displacement commuter bike rather than the custom Zero Engineering machine; it is best suited to beginners an
Purpose	This is a lightweight, low-powered commuter-scrambler intended for short urban trips and light leisure riding rather than performance or serious off-road use.
Rider Fit	At 160 kg with a 770 mm seat height, it is easy to handle for riders of most heights and physical strength, including smaller or less experienced riders.
Character	It has a friendly, approachable, low-stress character with modest power delivery, forgiving handling, and simple non-adjustable suspension suited to relaxed riding.
Not Ideal For	It is not for riders seeking high-speed touring, aggressive cornering performance, serious off-road capability, or comfortable two-up long-distance travel.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2022 Zero Engineering Type 5 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 660mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2022 Zero Engineering Type 5, with a moderate knee angle of around 110 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →