Vent Derapage RR 50 - 2026 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Year2026

Engine and Transmission Specifications

ClutchOil bath, multiplate
Gearbox6-speed
Cooling systemLiquid
Fuel systemCarburettor. Dell’Orto PHBN 16
Bore x Stroke40.3 x 39.0 mm (1.6 x 1.5 inches)
Engine detailsMinarelli engine
Engine typeSingle cylinder, two-stroke
Capacity:49.7 ccm (3.03 cubic inches)
 
 

CategorySuper motard
ModelVent Derapage RR 50
 
 

Brakes, suspension, Frame and wheels

Rear brakesSingle disc. Floating disc. Wave disc.
Diameter300 mm (11.8 inches)
Front brakesSingle disc. Dual floating caliper. Wave disc.
Rear tire130/70-17
Front tire100/80-17
Rear SuspensionHydraulic monoshock - preload and rebound adjustable with separate gas tank and HM-link 2.0 leverage
Front wheel travel260 mm (10.2 inches)
Front SuspensionUSD Hydraulic 41 mm - R16V, preload and rebound adjustable
Frame typeAluminium perimetral, double cradle with removable rear part

Physical measures and capacities

Fuel capacity6.00 litres (1.59 US gallons)
Wheelbase1410 mm (55.5 inches)
Ground clearance273 mm (10.7 inches)
Overall width815 mm (32.1 inches)
Overall length2080 mm (81.9 inches)
Overall height1220 mm (48.0 inches)
Seat height870 mm (34.3 inches) If adjustable, lowest setting. — see other bikes around this seat height →
Dry weight83.0 kg (183.0 pounds)

Other specs

CommentsItalian brand.
StarterKick
Color optionsRed/white/black, red/black
MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track55%
City45%
Cornering70%
Daily Riding25%
Touring10%
Passenger15%

Rider Profile

Best ForA supermoto (50cc) - suitability depends on your experience level and riding goals; check the full spec sheet before deciding if it fits your skill level.
PurposeSupermoto built for its class - everyday, practical use.
Rider FitSeat height of 870mm and a 83kg weight - check this against your inseam and strength before buying.
CharacterA supermoto from Vent, built around a 50cc engine - a real production model, but this profile is formula-generated from its class and spec sheet rather than individually reviewed.
Not Ideal ForNot for serious performance or off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2026 Vent Derapage RR 50 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 870mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2026 Vent Derapage RR 50, with a relaxed knee angle of around 135 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.