Sherco 50 SM R Factory - 2026 Specifications and Reviews

The 2026 Sherco 50 SM-R Factory is a lightweight supermotard designed for young riders and beginners seeking an affordable, nimble street bike. Powered by a liquid-cooled Minarelli two-stroke engine with a six-speed gearbox, it excels in urban riding and playful handling. Known for its stylish design and reliability, it's ideal for learning fundamental motorcycle skills.

2026
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Color OptionsBlue/green/grey, silver/green, green/red/grey
CategorySuper motard
ModelSherco 50 SM-R Factory

Engine and Transmission Specifications

StartingKick
Emission DetailsEuro 4
ClutchMultidisc in oil bath
Final DriveChain (final drive)
Gearbox6-speed
Cooling SystemLiquid
Ignition14 V 120 W
InductionCarburettor. Dell´ Orto
Bore x Stroke40.3 x 39.0 mm (1.6 x 1.5 inches)
Engine DetailsMinarelli AM6 engine
Capacity:49.7 ccm (3.03 cubic inches)
 
 

Physical measures and capacities

Fuel Capacity7.00 litres (1.85 US gallons)
Wheelbase1350 mm (53.1 inches)
Ground Clearance260 mm (10.2 inches)
Seat Height850 mm (33.5 inches) If adjustable, lowest setting.
Dry Weight83.0 kg (183.0 pounds)
 
 

Sherco 50 SM R Factory dimensions and frame

Rear BrakesSingle disc
Brake Disc Diameter180 mm (7.1 inches)
Front BrakesSingle disc
Rear Tyre3.50-17
Front Tyre2.50-17
Rear SuspensionMono-shock, 37 mm
Front SuspensionTelescopic fork, 37mm
FrameChrome-moly steel multi tube

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Update specsReport missing specs or required updates.
CommentsFrench brand.
Exhaust systemAluminum silencer
DrivelineGear primary drive.
Lubrication systemAutomatic mix,
Engine typeSingle cylinder, two-stroke
Year2025

Performance Profile & Rider Fit

Best For

Track60%
City55%
Cornering80%
Daily Riding30%
Touring10%
Passenger10%

Rider Profile

Best ForThis tiny 50cc supermotard is best suited to young or novice riders learning throttle control, cornering lines, and racecraft on a minimal-risk machine.
PurposeIt exists purely for pint-sized supermoto fun and competition, letting riders practice sharp flick-to-flick cornering and mini-track riding rather than serious transportation.
Rider FitIts very low seat height and featherweight 83kg dry mass make it accessible to smaller, lighter, or younger riders without demanding strength or reach.
CharacterExpect a buzzy, high-revving two-stroke character with playful, go-kart-like agility and immediate but modest performance.
Not Ideal ForIt is not suitable for riders seeking real-world speed, highway travel, passenger carrying, or genuine off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2026 Sherco 50 SM R Factory Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 850mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2026 Sherco 50 SM R Factory, with a relaxed knee angle of around 125 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.