Praga ED 610 - 2003 Specifications and Reviews

The 2003 Praga ED 610 is a lightweight enduro bike designed for trail riders seeking nimble off-road performance. Its 610cc single-cylinder engine delivers accessible power with 55.3 Nm of torque, while long-travel suspension and compact dimensions make it ideal for navigating technical terrain. Known for its simplicity and reliability, it suits adventure-minded riders tackling both challenging trails and adventure touring.

2003
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
Year2003
ModelPraga ED 610

Engine and Transmission Specifications

Fuel controlOHC
Valves per cylinder4
Bore x stroke95.0 x 86.0 mm (3.7 x 3.4 inches)
Torque55.30
Stroke4
Engine typeSingle cylinder
Capacity:609.60 ccm (37.20 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,495 mm (58.9 inches)
Seat height940 mm (37.0 inches) If adjustable, lowest setting.

Praga ED 610 dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter260 mm (10.2 inches)
Front brakesSingle disc
Rear tyre dimensions130/80-18
Front tyre dimensions90/90-21
Rear suspension travel320 mm (12.6 inches)
Front suspension travel290 mm (11.4 inches)

Speed and acceleration

Fuel capacity8.30 litres (2.19 gallons)
 
 

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track20%
City35%
Cornering55%
Daily Riding30%
Touring30%
Passenger15%

Rider Profile

Best ForThis bike suits intermediate to experienced riders who are comfortable with a tall, lightweight, off-road-biased machine.
PurposeIt is built primarily for enduro and off-road riding where agility, suspension travel, and lightweight handling matter more than outright speed.
Rider FitThe tall 940mm seat height and dirt-bike ergonomics demand decent leg length and physical fitness for standing, maneuvering, and picking the bike up if it falls.
CharacterIt has the character of a raw, purposeful single-cylinder trail machine, favoring nimble, playful handling over comfort or long-distance stability.
Not Ideal ForThis is not a good fit for riders seeking a comfortable highway tourer, a passenger-friendly bike, or high top-speed performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2003 Praga ED 610 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 940mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2003 Praga ED 610, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.