Mitt 125 MB Twin Custom - 2026 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryCustom / cruiser
ModelMitt 125 MB Twin Custom
Year2026

Engine and Transmission Specifications

Transmission typeChain   (final drive)
Gearbox5-speed
Cooling systemLiquid
IgnitionECU
Fuel systemInjection. EFI
Bore x Stroke57.0 x 48.8 mm (2.2 x 1.9 inches)
Power13.7 HP (10.0 kW) @ 8500 RPM
Engine typeV2, four-stroke
Capacity:125.0 ccm (7.63 cubic inches)
 
 

Brakes, suspension, Frame and wheels

Rear brakesSingle disc. Combined braking system (CBS)
Diameter280 mm (11.0 inches)
Front brakesSingle disc
Rear tire140/70-17
Front tire120/80-17
Rear SuspensionDual shocks
Front SuspensionInverted Fork

Physical measures and capacities

Fuel capacity16.50 litres (4.36 US gallons)
Wheelbase1360 mm (53.5 inches)
Overall width810 mm (31.9 inches)
Overall length2130 mm (83.9 inches)
Overall height1110 mm (43.7 inches)
Seat height680 mm (26.8 inches) If adjustable, lowest setting.
Power/weight ratio0.0834 HP/kg
Dry weight164.0 kg (361.6 pounds)
 
 

Other specs

CommentsSpanish brand. Chinese made bikes.
LightLED lights
InstrumentsLCD instruments
StarterElectric
Color optionsBlack
MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

13.7 hp
Peak Power (est.)

Best For

Track10%
City40%
Cornering25%
Daily Riding45%
Touring55%
Passenger50%

Rider Profile

Best ForA cruiser (125cc, 14 hp) - suitability depends on your experience level and riding goals; check the full spec sheet before deciding if it fits your skill level.
PurposeCruiser built for its class - everyday, practical use.
Rider FitSeat height of 680mm and a 164kg weight - check this against your inseam and strength before buying.
CharacterA cruiser from Mitt, built around a 125cc engine - a real production model, but this profile is formula-generated from its class and spec sheet rather than individually reviewed.
Not Ideal ForNot for serious performance or off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2026 Mitt 125 MB Twin Custom Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 680mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2026 Mitt 125 MB Twin Custom, with a cramped knee angle of around 75 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.

Related Motorcycle Specifications