What category is the 1997 MBK Flame 125?

The 1997 MBK Flame 125 has a Category of Scooter.

What is the engine size of the 1997 MBK Flame 125?

The 1997 MBK Flame 125 has a Capacity: of 124.00 ccm (7.57 cubic inches).

What type of engine does the 1997 MBK Flame 125 have?

The 1997 MBK Flame 125 has a Engine type of Single cylinder, four-stroke.

What is the engine power of the 1997 MBK Flame 125?

The 1997 MBK Flame 125 has a Power of 10.00.

What is the torque of the 1997 MBK Flame 125?

The 1997 MBK Flame 125 has a Torque of 9.00 Nm (0.9 kgf-m or 6.6 ft.lbs).

How much does the 1997 MBK Flame 125 weigh?

The 1997 MBK Flame 125 has a Dry weight of 106.0 kg (233.7 pounds).

What is the seat height of the 1997 MBK Flame 125?

The 1997 MBK Flame 125 has a Seat height of 755 mm (29.7 inches) If adjustable, lowest setting..

MBK Flame 125 - 1997 Specifications and Reviews

The 1997 MBK Flame 125 is a lightweight scooter designed for urban commuters and novice riders seeking affordable, practical transportation. Its modest 124cc four-stroke engine delivers adequate power for city riding while maintaining excellent fuel efficiency. Known for its reliability and accessibility, this scooter excels in congested traffic and is ideal for riders prioritizing convenience over performance.

⇄ Compare against another bike 📅 All Years

1997

❮❯

Add/Upload pictures for this motorcycle

General information
Category	Scooter
Year	1997
Model	MBK Flame 125

Engine and Transmission Specifications
Torque	9.00 Nm (0.9 kgf-m or 6.6 ft.lbs)
Power	10.00
Engine type	Single cylinder, four-stroke
Capacity:	124.00 ccm (7.57 cubic inches)
Brakes, suspension, Frame and wheels
Seat height	755 mm (29.7 inches) If adjustable, lowest setting.
Power/weight ratio	0.0943 HP/kg
Dry weight	106.0 kg (233.7 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

10 hp

Peak Power

Best For

Track5%

City88%

Cornering40%

Daily Riding80%

Touring20%

Passenger35%

Rider Profile

Best For	Suited to beginner and novice riders, including those just off a moped license, thanks to its light weight and modest power.
Purpose	Built for short urban hops, commuting, and running errands rather than any kind of performance riding.
Rider Fit	Its low seat height and light dry weight make it very manageable for shorter or less physically strong riders.
Character	An easygoing, no-drama city scooter that prioritizes simplicity and maneuverability over speed or excitement.
Not Ideal For	Not for riders wanting highway touring capability, passenger comfort on long trips, or any off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

1997 MBK Flame 125 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 755mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 1997 MBK Flame 125, with a moderate knee angle of around 95 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →