Kawasaki Ninja H2 R - 2018 Specifications and Reviews

The 2018 Kawasaki Ninja H2 R is an extreme hyperbike engineered for experienced riders seeking maximum performance and cutting-edge technology. Producing 326 horsepower with advanced electronics including cornering management, traction control, and launch control, it delivers superb acceleration and handling precision. Best known for its supercharged engine and sophisticated rider aids, it represents the pinnacle of streetbike engineering for dedicated track enthusiasts and performance-focused collectors.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategorySport
Year2018
ModelKawasaki Ninja H2 R

Engine and Transmission Specifications

DrivelineSealed chain
ClutchWet multi-disc, manual
Transmission type,final driveChain
Gearbox6-speed
Cooling systemLiquid
Lubrication systemForced lubrication, wet sump with oil cooler
IgnitionDigital
Fuel controlDouble Overhead Cams/Twin Cam (DOHC)
Fuel systemInjection
Valves per cylinder4
Bore x Stroke76.0 x 55.0 mm (3.0 x 2.2 inches)
Compression8.3:1
Torque165.00 Nm (16.8 kgf-m or 121.7 ft.lbs) @ 12500 RPM
Power310.00 HP (226.3 kW) @ 14000 RPM
Engine detailsKawasaki supercharger intake system
Engine typeIn-line four, four-stroke
 
 

Brakes, suspension, Frame and wheels

Rear brakes diameter250 mm (9.8 inches)
Rear brakesSingle disc. Brembo. Opposed 2-piston caliper
Front brakes diameter330 mm (13.0 inches)
Front brakesDouble disc. Brembo. Floating discs. Opposed 4-piston caliper
Rear tyre190/65-R17
Front tyre120/70-R17
Rear wheel travel135 mm (5.3 inches)
Rear SuspensionUni-Trak, Öhlins TTX36 gas-charged shock with piggyback reservoir, compression damping, rebound damping, preload adjustability and top-out spring
Front wheel travel120 mm (4.7 inches)
Front Suspension43 mm inverted fork with rebound and compression damping, spring preload adjustability and top-out springs
Trail108 mm (4.3 inches)
Rake (fork angle)27.0°
Frame typeTrellis, high-tensile steel with Swingarm Mounting Plate

Physical measures and capacities

Fuel capacity17.00 litres (4.49 gallons)
Wheelbase1,450 mm (57.1 inches)
Ground clearance130 mm (5.1 inches)
Overall width850 mm (33.5 inches)
Overall length2,070 mm (81.5 inches)
Overall height1,160 mm (45.7 inches)
Seat height830 mm (32.7 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc216.1 kg (476.3 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Comments326 hp at 14.000 rpm with RAM air. Kawasaki Corner Management Function (KCMF), Kawasaki Traction Control (KTRC), Kawasaki Launch Control Mode (KLCM), Kawasaki Intelligent anti-lock Brake System (KIBS), Kawasaki Engine Brake Control, Kawasaki Quick Shifter (KQS) (upshift and downshift), Öhlins Electronic Steering Damper.
Factory warranty12 Months
StarterElectric
Color optionsMirror Coated Matte Spark Black

Performance Profile & Rider Fit

321.5 hp
Peak Power
2.5s
0-60 mph

Best For

Track100%
City20%
Cornering85%
Daily Riding15%
Touring15%
Passenger5%

Rider Profile

Best ForThis machine is built exclusively for expert-level and professional riders with extensive track experience and supercharged-power management skills.
PurposeIt exists purely as a closed-course track weapon designed to deliver record-shattering acceleration and top speed, not as a street-legal motorcycle.
Rider FitRiders need excellent physical fitness, strong core and arm strength, and high tolerance for aggressive, committed riding positions under extreme g-forces.
CharacterIt rewards fearless, precise, and disciplined riders who crave the raw intensity of supercharged four-cylinder power and razor-sharp track handling.
Not Ideal ForIt is completely unsuitable for beginners, commuters, passengers, or anyone seeking comfort, practicality, or everyday road usability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2018 Kawasaki Ninja H2 R Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 830mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2018 Kawasaki Ninja H2 R, with a cramped knee angle of around 75 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

⚠ Safety Recalls (2)

POWER TRAIN:MANUAL TRANSMISSION Nov 2020 · 20V676000

Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018-2020 Ninja H2 SX, Ninja H2 SXSE, and 2019-2020 Ninja H2 SXSE+ motorcycles. In the event of a gear misengagement the engine electronic control unit (ECU) programming doesn't have the capability to suppress high RPM during transmission. If the transmission gears are not properly engaged while shifting into 4th or 5th gear, high engine RPM can cause the output gears of 4th or 5th to fracture when the gears re-engage.

Risk: Damaged gears and the inability to shift can cause the engine to lock up, increasing the risk of a crash.

Remedy: KMC will notify owners, and dealers will reprogram the FI-ECU software, free of charge. Owners are advised to not ride their motorcycle until the repair has been completed. The recall began November 16, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC20-10.

STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND Aug 2018 · 18V580000

Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2018 Kawasaki Ninja H2 SX SE (ZXT02BJ) motorcycles. The pin for the center stand spring may have been improperly welded, and, as a result, the pin may shift or fall off resulting in the spring detaching and the center stand dropping to the ground unexpectedly and dragging while riding.

Risk: The dragging center stand can cause a loss of control, increasing the risk of a crash.

Remedy: Kawasaki will notify owners, and dealers will replace the left center stand bracket, free of charge. Owners may contact Kawasaki customer service at 1-866-802-9381. Kawasaki's number for this recall is MC18-05.

Source: NHTSA. View all Kawasaki recalls →

Rider Reviews

Total comments: 1
64x64

MotorcycleDB Review

The 2018 Kawasaki Ninja H2 R is an absolute beast of a motorcycle. With its supercharged 998cc engine, it delivers an incredible amount of power and speed. The aerodynamic design and carbon-fiber bodywork not only make it look stunning but also improve its performance. The electronic rider aids, including multiple riding modes and traction control, help to keep this powerful machine under control. Overall, the Ninja H2 R is a top-of-the-line sports motorcycle that will impress any rider looking for an adrenaline-pumping experience on the road or track. If you're looking for a high-performance motorcycle, the 2018 Kawasaki Ninja H2 R is definitely worth considering. With its supercharged engine and advanced electronic features, it offers an exhilarating riding experience. The sleek and aggressive design is sure to turn heads wherever you go. Whether you're a seasoned rider or a thrill-seeker looking to push the limits, the Ninja H2 R is an excellent choice for those wanting to experience the raw power and speed of a top-of-the-line superbike.
Reply

Add a Comment


Please Login or Register if you would like to leave a comment.