Kawasaki Ninja H2 - 2018 Specifications and Reviews

The 2018 Kawasaki Ninja H2 is a supercharged hypersport machine designed for experienced riders seeking extreme performance and cutting-edge technology. Producing 210 horsepower with a unique supercharger system, it excels in acceleration and top speed while offering advanced electronic controls including cornering management, traction control, and launch control. This flagship sport bike is best known for combining raw power with sophisticated rider aids and precision handling.

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategorySport
Year2018
ModelKawasaki Ninja H2

Engine and Transmission Specifications

Greenhouse gases197.9 CO2 g/km. (CO2 - Carbon dioxide emission)
Fuel consumption8.53 litres/100 km (11.7 km/l or 27.58 mpg)
DrivelineSealed chain
ClutchWet multi-disc, manual
Transmission type,final driveChain
Gearbox6-speed
Cooling systemLiquid
Lubrication systemForced lubrication, wet sump with oil cooler
IgnitionDigital
Fuel controlDouble Overhead Cams/Twin Cam (DOHC)
Fuel systemInjection
Valves per cylinder4
Bore x Stroke76.0 x 55.0 mm (3.0 x 2.2 inches)
Compression8.5:1
Torque133.50 Nm (13.6 kgf-m or 98.5 ft.lbs) @ 13600 RPM
Power200.00 HP (146.0 kW) @ 11000 RPM
Engine detailsKawasaki supercharger intake system
Engine typeIn-line four, four-stroke
 
 

Brakes, suspension, Frame and wheels

Rear brakes diameter250 mm (9.8 inches)
Rear brakesSingle disc
Front brakes diameter330 mm (13.0 inches)
Front brakesDouble disc. Floating discs.
Rear tyre200/55-ZR17
Front tyre120/70-ZR17
Rear wheel travel135 mm (5.3 inches)
Rear SuspensionUni-Trak, Öhlins TTX36 gas-charged shock with piggyback reservoir, compression damping, rebound damping, preload adjustability and top-out spring
Front wheel travel119 mm (4.7 inches)
Front Suspension43 mm inverted fork with rebound and compression damping, spring preload adjustability and top-out springs
Trail103 mm (4.1 inches)
Rake (fork angle)27.0°
Frame typeTrellis, high-tensile steel with Swingarm Mounting Plate
 
 

Physical measures and capacities

Fuel capacity17.00 litres (4.49 gallons)
Wheelbase1,455 mm (57.3 inches)
Ground clearance130 mm (5.1 inches)
Overall width770 mm (30.3 inches)
Overall length2,085 mm (82.1 inches)
Overall height1,125 mm (44.3 inches)
Seat height825 mm (32.5 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc238.1 kg (524.8 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Comments154.5 kW (210 PS) at 11.000 rpm with RAM air. Kawasaki Corner Management Function (KCMF), Kawasaki Traction Control (KTRC), Kawasaki Launch Control Mode (KLCM), Kawasaki Intelligent anti-lock Brake System (KIBS), Kawasaki Engine Brake Control, Kawasaki Quick Shifter (KQS) (upshift and downshift), Öhlins Electronic Steering Damper.
Factory warranty12 month Limited Warranty
StarterElectric
Color optionsMirror Coated Spark Black

Performance Profile & Rider Fit

239.6 hp
Peak Power
2.6s
0-60 mph

Best For

Track85%
City30%
Cornering82%
Daily Riding30%
Touring35%
Passenger30%

Rider Profile

Best ForFor expert riders only. Its 240hp supercharged engine demands serious skill, respect and electronic-aid awareness; not remotely a machine for novices.
PurposeA supercharged hyperbike built for outright speed, ferocious acceleration and high-speed sport riding on track days and open roads.
Rider FitCommitted sport ergonomics: 825mm seat, low clip-ons, rear-set pegs and a 238kg heft. Aggressive lean-forward stance that punishes low-speed slogs.
CharacterA brutally fast, intoxicating showpiece with signature supercharger whine, top-tier Brembo/Ohlins hardware and mirror-black paint. Raw, exclusive and theatrical.
Not Ideal ForBeginners, commuters, off-roaders, or anyone wanting relaxed touring, easy city runs or comfortable two-up riding.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2018 Kawasaki Ninja H2 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 825mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2018 Kawasaki Ninja H2, with a cramped knee angle of around 70 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

⚠ Safety Recalls (2)

POWER TRAIN:MANUAL TRANSMISSION Nov 2020 · 20V676000

Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018-2020 Ninja H2 SX, Ninja H2 SXSE, and 2019-2020 Ninja H2 SXSE+ motorcycles. In the event of a gear misengagement the engine electronic control unit (ECU) programming doesn't have the capability to suppress high RPM during transmission. If the transmission gears are not properly engaged while shifting into 4th or 5th gear, high engine RPM can cause the output gears of 4th or 5th to fracture when the gears re-engage.

Risk: Damaged gears and the inability to shift can cause the engine to lock up, increasing the risk of a crash.

Remedy: KMC will notify owners, and dealers will reprogram the FI-ECU software, free of charge. Owners are advised to not ride their motorcycle until the repair has been completed. The recall began November 16, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC20-10.

STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND Aug 2018 · 18V580000

Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2018 Kawasaki Ninja H2 SX SE (ZXT02BJ) motorcycles. The pin for the center stand spring may have been improperly welded, and, as a result, the pin may shift or fall off resulting in the spring detaching and the center stand dropping to the ground unexpectedly and dragging while riding.

Risk: The dragging center stand can cause a loss of control, increasing the risk of a crash.

Remedy: Kawasaki will notify owners, and dealers will replace the left center stand bracket, free of charge. Owners may contact Kawasaki customer service at 1-866-802-9381. Kawasaki's number for this recall is MC18-05.

Source: NHTSA. View all Kawasaki recalls →

Rider Reviews

Total comments: 1
64x64

MotorcycleDB Review

The 2018 Kawasaki Ninja H2 is a beast of a motorcycle, with its supercharged 998cc inline-four engine delivering an astounding 207 horsepower. This bike is designed to provide an exhilarating riding experience, with top-notch acceleration and speed that will make any rider feel like a true daredevil on the road. The aerodynamic design and advanced technology make the Ninja H2 a standout in its class, and its sleek, aggressive styling only adds to its appeal. In addition to its impressive performance, the 2018 Kawasaki Ninja H2 also comes equipped with advanced safety features and customizable riding modes, making it a great option for riders of all skill levels. Whether you're a seasoned pro or a novice rider looking to step up your game, the Ninja H2 offers a thrilling and dynamic riding experience that is sure to impress. Overall, the 2018 Kawasaki Ninja H2 is a top-of-the-line motorcycle that delivers unparalleled power, speed, and style, making it a standout choice for anyone in the market for a high-performance sportbike.
Reply

Add a Comment


Please Login or Register if you would like to leave a comment.