Johnny Pag Raptor-X - 2009 Specifications and Reviews

The 2009 Johnny Pag Raptor-X is a lightweight 300cc touring motorcycle designed for budget-conscious riders seeking an affordable, reliable commuter with twin-cylinder efficiency. Its liquid-cooled engine and 23.8 horsepower deliver practical daily performance, while the touring classification emphasizes comfortable, economical long-distance capability for entry-level adventurers.

2009
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryTouring
Year2009
ModelJohnny Pag Raptor-X
 
 

Engine and Transmission Specifications

ClutchMultiplate oil bath
Gearbox5-speed
Cooling systemLiquid
Lubrication systemForced Lubrication
Fuel controlDOHC
Valves per cylinder2
Fuel systemCarburettor. Dual 26mm Keihin Vacuum Carburetor
Bore x stroke57.0 x 53.0 mm (2.2 x 2.1 inches)
Compression10.2:1
Torque18.50
Power23.80
Stroke4
Engine typeTwin
Capacity:300.00 ccm (18.31 cubic inches)

Physical measures and capacities

Wheelbase1,600 mm (63.0 inches)
Seat height660 mm (26.0 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc158.8 kg (350.0 pounds)
 
 

Johnny Pag Raptor-X dimensions and frame

Rear brakesSingle disc. 2-piston calipers
Front brakesDouble disc. 2-piston calipers
Rear tyre dimensions160/90-16
Front tyre dimensions80/90-21
Rake (fork angle)36.0°

Speed and acceleration

Color optionsBlack, Red
Fuel consumption pr. 10 km (6.2 miles)3.61 litres (0.95 gallons)
Fuel capacity15.89 litres (4.20 gallons)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

23.8 hp
Peak Power
12.5s
0-60 mph

Best For

Track10%
City55%
Cornering45%
Daily Riding50%
Touring30%
Passenger30%

Rider Profile

Best ForThis bike suits beginner to intermediate riders thanks to its low power output and manageable chassis, despite its labeling as a touring-category machine with a somewhat unconventional cruiser-like front wheel setup.
PurposeIt works best as a light, low-cost runabout for casual road riding and short trips rather than genuine long-distance touring.
Rider FitThe low 660mm seat height and lightweight 158.8kg frame make it accessible to shorter or less physically strong riders.
CharacterIt has a laid-back, unpretentious personality, delivering modest performance with easy, non-intimidating handling.
Not Ideal ForIt is not suited for riders seeking high-speed touring, serious off-road capability, or strong passenger-carrying comfort.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2009 Johnny Pag Raptor-X Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 660mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2009 Johnny Pag Raptor-X, with a cramped knee angle of around 70 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.