Honda XR 650 L - 2006 Specifications and Reviews

The 2006 Honda XR 650 L is a rugged single-cylinder enduro designed for adventure riders seeking reliable off-road capability. Its air-cooled 644cc engine and carbureted fuel system deliver straightforward, dependable performance across varied terrain. Known for durability and versatility, it appeals to beginners and experienced riders alike who value simplicity and proven mechanics over modern complexity.

5 stars Average rating: 5 from 1 votes
.

General information

CategoryEnduro / offroad
Year2006
ModelHonda XR 650 L

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox5-speed
Cooling systemAir
Lubrication systemDry sump
IgnitionSolid-state CD with electronic advance
Fuel controlSOHC
Fuel systemCarburettor. 42.5mm diaphragm-type CV
Bore x stroke100.0 x 82.0 mm (3.9 x 3.2 inches)
Compression8.3:1
Stroke4
Engine typeSingle cylinder
Capacity:644.00 ccm (39.30 cubic inches)

Physical measures and capacities

Wheelbase1,455 mm (57.3 inches)
Ground clearance330 mm (13.0 inches)
Seat height940 mm (37.0 inches) If adjustable, lowest setting.
Dry weight147.0 kg (324.0 pounds)
 
 

Honda XR 650 L dimensions and frame

Rear brakesSingle disc
Front brakesSingle disc
Rear tyre dimensions110/90-18
Front tyre dimensions80/70-21
Rear suspension travel279 mm (11.0 inches)
Rear suspensionPro-Link Showa single-shock with spring-preload, 20-position compression- and 20-position rebound-damping adjustability
Front suspension travel295 mm (11.6 inches)
Front suspension43mm air-adjustable leading-axle Showa cartridge fork with 16-position compression-damping adjustability
Trail102 mm (4.0 inches)
Rake (fork angle)27.0°

Speed and acceleration

Color optionsRed
Fuel capacity10.59 litres (2.80 gallons)
 
 

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track15%
City40%
Cornering50%
Daily Riding40%
Touring35%
Passenger25%

Rider Profile

Best ForBest suited to riders with at least some off-road or dual-sport experience, as the tall seat height and firm suspension reward confident, active riding.
PurposeBuilt primarily as a rugged trail and enduro machine that can be licensed for occasional street use rather than a dedicated road or touring bike.
Rider FitThe tall 940mm seat height and 330mm ground clearance favor taller riders or those comfortable standing on the pegs and managing a lean, top-heavy-feeling machine at low speed.
CharacterA rugged, no-frills single-cylinder trail bike that values durability, long-travel suspension, and light weight over outright power or refinement.
Not Ideal ForNot a good fit for riders seeking highway comfort, passenger-friendly touring, or strong outright acceleration.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2006 Honda XR 650 L Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 940mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2006 Honda XR 650 L, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.