What category is the 2014 Honda SH150I?

General information
Category	Scooter
Model	Honda SH150i
Year	2014
Engine and Transmission Specifications
Emission details	Meets current California Air Resources Board (CARB) and EPA standards.
Greenhouse gases	59.9 CO
Fuel consumption	2.58 litres/100 km (38.8 km/l or 91.17 mpg)
Transmission type,final drive	Belt
Gearbox	Automatic
Cooling system	Liquid
Ignition	Digital transistorized with electronic advance
Fuel control	SOHC
Fuel system	Injection. Programmed Fuel Injection (PGM-FI) with automatic enricher circuit
Bore x stroke	58.0 x 57.8 mm (2.3 x 2.3 inches)
Compression	11.0:1
Engine type	Single cylinder, four-stroke
Capacity:	153.00 ccm (9.34 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes diameter	130 mm (5.1 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	220 mm (8.7 inches)
Front brakes	Single disc. Two-piston calipers.
Rear tyre dimensions	120/80-16
Front tyre dimensions	100/80-16
Rear suspension travel	84 mm (3.3 inches)
Rear suspension	Swingarm with dual hydraulic shocks, spring-preload adjustability
Front suspension travel	89 mm (3.5 inches)
Front suspension	33mm hydraulic fork
Physical measures and capacities
Fuel capacity	6.81 litres (1.80 gallons)
Wheelbase	1,356 mm (53.4 inches)
Seat height	785 mm (30.9 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	137.0 kg (302.0 pounds)

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Starter	Electric
Wheelbase	1,340 mm (52.8 inches)
Ground clearance	149 mm (5.9 inches)
Overall width	740 mm (29.1 inches)
Overall length	2,030 mm (79.9 inches)
Overall height	1,150 mm (45.3 inches)
Wheels	U-section 5-spoke cast aluminium
Rear tyre	120/80-16
Front tyre	100/80-16
Rear wheel travel	82 mm (3.2 inches)
Rear Suspension	Dual damper unit swingarm
Front wheel travel	90 mm (3.5 inches)
Front Suspension	33mm telescopic fork
Frame type	Steel
Driveline	V-matic
Bore x Stroke	52.4 x 57.8 mm (2.1 x 2.3 inches)
Compression	11.0:1
Torque	11.50 Nm (1.2 kgf-m or 8.5 ft.lbs) @ 7000 RPM
Power	13.00 HP (9.5 kW) @ 9000 RPM
Capacity:	125.00 ccm (7.63 cubic inches)
Model	Honda SH125i
Comments	Model ID: SH150i
Color options	Metallic Red, Metallic Black
Factory warranty	One year. Unlimited milage. Transferable.

Performance Profile & Rider Fit

6.5s

0-60 mph (est.)

Best For

Track10%

City55%

Cornering35%

Daily Riding60%

Touring55%

Passenger55%

Rider Profile

Best For	Suits new-to-intermediate riders who want a low, unintimidating cruiser to build confidence on.
Purpose	Built for relaxed boulevard cruising and short scenic rides rather than outright performance.
Rider Fit	The low seat height and low center of gravity make it easy for shorter riders to flat-foot and manage at a stop.
Character	A classic mellow V-twin cruiser with laid-back styling, easy manners, and a soft, unhurried power delivery.
Not Ideal For	Not the right choice for riders chasing sport-bike speed, aggressive cornering, or any off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2014 Honda SH150I Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 785mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2014 Honda SH150I, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →