Honda Benly 50 S - 2006 Specifications and Reviews

The 2006 Honda Benly 50 S is a lightweight sport scooter designed for entry-level riders and urban commuters seeking affordable, reliable transportation. Its compact 49cc single-cylinder engine delivers modest performance ideal for city riding, while the practical 4-speed transmission and air cooling ensure easy maintenance and everyday usability.

2006
4 stars Average rating: 4 from 1 votes
.

Engine and Transmission Specifications

ClutchWet plate
Gearbox4-speed
Cooling systemAir
StarterKick
IgnitionCDI type
Fuel controlOHC
Bore x stroke39.0 x 42.0 mm (1.5 x 1.7 inches)
Compression10.0:1
Torque4.10
Power3.75
Stroke4
Engine typeSingle cylinder
Capacity:49.00 ccm (2.99 cubic inches)

Physical measures and capacities

Overall height1,155 mm (45.5 inches)
Seat height755 mm (29.7 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc77.0 kg (169.8 pounds)
Dry weight73.0 kg (160.9 pounds)
 
 

Honda Benly 50 S dimensions and frame

Trail70 mm (2.8 inches)

Speed and acceleration

Power/weight ratio0.0514 HP/kg

CategorySport
Year2006
ModelHonda Benly 50 S

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Fuel capacity5.50 litres (1.45 gallons)

Performance Profile & Rider Fit

3.8 hp
Peak Power

Best For

Track5%
City82%
Cornering30%
Daily Riding60%
Touring10%
Passenger10%

Rider Profile

Best ForThis is a beginner-friendly commuter moped best suited to new riders or those wanting simple, low-risk transportation, and note the 'Sport' category label is likely a factory trim naming rather than a true sporty performance designation.
PurposeDesigned for short-hop urban commuting and light errand-running rather than any form of performance or long-distance riding.
Rider FitExtremely light weight and a low, accessible seat height make this an easy, unintimidating bike for smaller or less experienced riders to manage.
CharacterA humble, economical little runabout that prioritizes practicality, fuel efficiency, and ease of use over excitement or speed.
Not Ideal ForNot suitable for highway travel, touring, carrying a passenger, or any rider seeking real power or performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2006 Honda Benly 50 S Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 755mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2006 Honda Benly 50 S, with a cramped knee angle of around 65 degrees and a forward-leaning riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.