What category is the 2012 Vento Triton LI?

General information
Year	2012
Engine and Transmission Specifications
Driveline	Automatic CVT
Transmission type,final drive	Belt
Gearbox	Automatic
Cooling system	Air
Ignition	CDI
Fuel system	Carburettor
Bore x stroke	40.0 x 39.2 mm (1.6 x 1.5 inches)
Torque	9.22 Nm (0.9 kgf-m or 6.8 ft.lbs) @ 6500
Power	4.90
Engine type	Single cylinder, two-stroke
Capacity:	49.00 ccm (2.99 cubic inches)

Category	Scooter
Model	Vento Triton LI

Brakes, suspension, Frame and wheels
Wheels	Lightweight Cast-Aluminum 12 6-Spoke
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	130/70-12
Front tyre dimensions	120/70-12
Rear suspension	Left single shock, hydraulic
Front suspension	Telescopic hydraulic fork
Physical measures and capacities
Fuel capacity	5.29 litres (1.40 gallons)
Overall width	691 mm (27.2 inches)
Overall length	1,890 mm (74.4 inches)
Overall height	1,290 mm (50.8 inches)
Seat height	739 mm (29.1 inches) If adjustable, lowest setting.
Power/weight ratio	0.0522 HP/kg
Dry weight	93.9 kg (207.0 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Blue, red, yellow
Factory warranty	1 year/5000 miles limited warranty.
Starter	Electric

Performance Profile & Rider Fit

4.9 hp

Peak Power

Best For

Track5%

City78%

Cornering40%

Daily Riding65%

Touring10%

Passenger25%

Rider Profile

Best For	Suitable for beginners and casual riders with little or no prior motorcycling experience.
Purpose	Designed purely for short, low-speed urban commuting and running errands around town.
Rider Fit	Very light and easy to handle, requiring minimal physical strength or effort at low speeds or when maneuvering.
Character	A small, practical, no-frills 50cc scooter meant for economical everyday transport rather than excitement.
Not Ideal For	Not suitable for highway travel, long-distance touring, carrying a passenger comfortably, or riders seeking performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2012 Vento Triton LI Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 739mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2012 Vento Triton LI, with a moderate knee angle of around 95 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →