VeliMotor VL800DT-K - 2026 Specifications and Reviews

The VeliMotor VL800DT-K is a compact, EEC-homologated electric scooter powered by an 800W DC brushless hub motor with 30 Nm of torque, drawing from a 48V 20Ah Li-ion battery for roughly 50 km of range. Top speed is electronically limited to 45 km/h, with a 750 mm seat height and 65 kg kerb weight making it an easy, lightweight city runabout.

2026
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryScooter
Year2026
ModelVeliMotor VL800DT-K

Engine and Transmission Specifications

Top speed45.0 km/h (28.0 mph), electronically limited
Torque30.0 Nm (22.1 ft.lbs)
Power1.1 HP (0.8 kW)
Engine detailsRated power 800W
Engine typeDC brushless hub motor

Brakes, suspension, Frame and wheels

Rear brakesDrum
Front brakesDisc
Rear tire2.15-10
Front tire2.15-10
 
 

Physical measures and capacities

Wheelbase1230 mm (48.4 inches)
Ground clearance150 mm (5.9 inches)
Overall height1010 mm (39.8 inches)
Overall width700 mm (27.6 inches)
Overall length1650 mm (65.0 inches)
Seat height750 mm (29.5 inches)
Dry weight65.0 kg (143.3 pounds)
 
 

Other specs

CommentsEEC-homologated. 48V 20Ah Li-ion battery (6 kg), quick removable. Range approximately 50 km. Charging 5-6 hours on a 48V 6A charger. Twist-grip throttle. Max load 150 kg.
LightLED

Performance Profile & Rider Fit

1.1 hp
Peak Power
28 mph
Top Speed

Best For

Track2%
City75%
Cornering25%
Daily Riding65%
Touring8%
Passenger15%

Rider Profile

Best ForIdeal for beginners or anyone wanting a simple, low-powered electric scooter with no special riding skill required.
PurposeBuilt for short urban commutes and low-speed city errands rather than performance riding.
Rider FitLight and easy to handle at 65 kg with a modest 750 mm seat height, suiting smaller or less physically strong riders.
CharacterA compact, eco-friendly city scooter favoring simplicity and low running costs over excitement.
Not Ideal ForNot for highway speeds, touring, or carrying a passenger any real distance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2026 VeliMotor VL800DT-K Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 750mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2026 VeliMotor VL800DT-K, with a moderate knee angle of around 95 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.