Suzuki GSX-R1000RS 40th Anniversary - 2027 Specifications and Reviews

The Suzuki GSX-R1000RS 40th Anniversary marks a new top trim in the GSX-R1000 range for 2027, celebrating four decades of the GSX-R nameplate with a dedicated commemorative livery. Power comes from a 999.8cc inline-four producing a claimed 195 hp (143.5 kW) at 13,200 rpm and 110 Nm at 11,000 rpm, fed by ride-by-wire fuel injection and fitted with a factory Akrapovic exhaust. An aluminium frame, inverted front fork, Brembo radial-mount front brakes, and a wet multi-plate slipper clutch round out the package, for a claimed wet weight of 203 kg. Suzuki lists the model with a 6-speed constant-mesh gearbox and chain final drive.

2027
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategorySport
Year2027
ModelSuzuki GSX-R1000RS 40th Anniversary

Engine and Transmission Specifications

StarterElectric
Transmission typeChain, DID525HV3, 120 links (final drive)
Gearbox6-speed, constant mesh
ClutchWet, multi-plate, SCAS-equipped (slipper/assist)
Torque110 Nm (81.1 lb-ft) @ 11000 RPM
Power195 hp (143.5 kW) @ 13200 RPM
Compression ratio13.8:1
Cooling systemLiquid
Capacity999.8 ccm (60.9 cubic inches)
Bore x stroke76.0 x 55.1 mm
Engine detailsFuel injection with ride-by-wire throttle bodies. DOHC, 4 valves per cylinder. Wet sump lubrication. Standard Akrapovic exhaust.
Engine typeFour-cylinder, transverse, 4-stroke

Brakes, suspension, Frame and wheels

Trail95 mm (3.7 in)
Rake23.2 degrees
Rear tire190/50ZR17 M/C (73W), tubeless
Front tire120/70ZR17 M/C (58W), tubeless
Rear brakesSingle disc, 220mm (8.66 in), Nissin 1-piston caliper
Front brakesDouble disc, 320mm (12.6 in), radial-mount Brembo 4-piston calipers
Rear suspensionLink-type, coil spring, oil damped
Front suspensionInverted telescopic fork, coil spring, oil damped
Frame typeAluminium
 
 

Physical measures and capacities

Wet weight203 kg (447.5 lbs)
Fuel capacity16 liters (3.5 US gallons)
Ground clearance130 mm (5.1 in)
Overall height1145 mm (45.1 in)
Overall width705 mm (27.8 in)
Overall length2075 mm (81.7 in)
Seat height825 mm (32.5 in)
Wheelbase1420 mm (55.9 in)

Other specs

Comments40th Anniversary Edition livery marking four decades of the GSX-R line. Standard equipment includes a slip/assist clutch and a factory Akrapovic exhaust.

Performance Profile & Rider Fit

195 hp
Peak Power

Best For

Track90%
City20%
Cornering90%
Daily Riding20%
Touring10%
Passenger15%

Rider Profile

Best ForBest suited to experienced sportbike riders - 195 hp in an aggressive supersport chassis with no rider-aid details published leaves little room for error.
PurposeA 40th-anniversary commemorative flagship built for the track and spirited road riding, not for touring or daily commuting.
Rider FitA committed, low, forward-leaning sportbike riding position with rearset footpegs demands real physical fitness and flexibility.
CharacterA special-livery top trim celebrating 40 years of the GSX-R1000 line, distinguished by its anniversary graphics and standard Akrapovic exhaust.
Not Ideal ForNot for new riders, not for touring or passengers, and not for anyone wanting a comfortable everyday motorcycle.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2027 Suzuki GSX-R1000RS 40th Anniversary Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 825mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2027 Suzuki GSX-R1000RS 40th Anniversary, with a cramped knee angle of around 70 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.