Sucker Punch Sallys Working Mans Special - 2011 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryCustom / cruiser
ModelSucker Punch Sallys Working Mans Special
Year2011
 
 

Engine and Transmission Specifications

Transmission type,final driveChain
Gearbox6-speed
IgnitionDual Fire Electronic
Fuel controlOHV
Fuel systemCarburettor
Compression8.5:1
Engine typeV2, four-stroke
Capacity:1337.27 ccm (81.60 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakesSingle disc. Single piston
Front brakesSingle disc. Single piston
Rear tyre dimensions180/60-VB16
Front tyre dimensions3.00-21
Rear suspensionRigid
Front suspensionSprung
Rake (fork angle)30.0°
Frame type30 Degrees No-Stretch Rigid Frame
 
 

Physical measures and capacities

Oil capacity2.80 litres (0.18 quarts)
Fuel capacity8.52 litres (2.25 gallons)
Wheelbase1,651 mm (65.0 inches)
Ground clearance102 mm (4.0 inches)
Seat height610 mm (24.0 inches) If adjustable, lowest setting.
Dry weight224.5 kg (495.0 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsCustom colors
StarterElectric & kick

Performance Profile & Rider Fit

Best For

Track5%
City35%
Cornering15%
Daily Riding30%
Touring15%
Passenger10%

Rider Profile

Best ForBest suited to experienced riders who are comfortable managing a rigid-frame custom with no rear suspension and a stretched-out riding stance.
PurposeBuilt as a stripped-down, boulevard-style custom cruiser meant for style, presence, and short scenic rides rather than performance or distance.
Rider FitThe low 610mm seat height is accessible, but the rigid rear end transmits every bump directly to the rider, demanding tolerance for a harsh, unforgiving ride.
CharacterA raw, old-school hardtail chopper with a big 45-degree V-twin rumble, all attitude and minimal compromise for practicality.
Not Ideal ForNot for riders seeking long-distance comfort, cornering agility, off-road capability, or a passenger-friendly setup.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2011 Sucker Punch Sallys Working Mans Special Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 610mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2011 Sucker Punch Sallys Working Mans Special, with a cramped knee angle of around 65 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.