Sherco SE 0.5 - 2009 Specifications and Reviews

The 2009 Sherco SE 0.5 is a lightweight 50cc enduro machine designed for entry-level off-road riders and younger enthusiasts seeking trail capability. Its liquid-cooled single-cylinder engine and 83kg dry weight deliver nimble handling and easy maneuverability in technical terrain. Best suited for beginners learning fundamental dirt bike skills and navigating challenging off-road conditions.

Not Rated stars Average rating: Not Rated from 0 votes
.

Engine and Transmission Specifications

ClutchMultidisc in oil bath
Transmission typefinal driveChain
Gearbox6-speed
Cooling systemLiquid
StarterElectric & kick
Fuel systemCarburettor. Dellorto
Bore x stroke40.3 x 39.0 mm (1.6 x 1.5 inches)
Stroke2
Engine typeSingle cylinder
Capacity:49.70 ccm (3.03 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,360 mm (53.5 inches)
Ground clearance330 mm (13.0 inches)
Seat height910 mm (35.8 inches) If adjustable, lowest setting.
Dry weight83.0 kg (183.0 pounds)

Sherco SE 0.5 dimensions and frame

Exhaust systemSteel exhaust system with aluminum silencer
Rear brakesSingle disc
Front brakesSingle disc
Rear tyre dimensions2.15-18
Front tyre dimensions1.61-21
Rear suspensionOlle single shock absorber, adjustable spring preload
Front suspensionPaioli 41mm dia hydraulic telescopic fork
Frame typeChrome-molybdenum tubing main frame with a removable sub-frame

Speed and acceleration

Color optionsBlue, red, green
Fuel capacity7.00 litres (1.85 gallons)
 
 

CategoryEnduro / offroad
Year2009
ModelSherco SE 0.5

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

6 hp
Peak Power (est.)

Best For

Track4%
City28%
Cornering12%
Daily Riding18%
Touring3%
Passenger0%

Rider Profile

Best ForAimed at younger or lighter riders learning enduro; the tall seat suits confident novices, but the light, forgiving 50cc engine is beginner-friendly off the pavement.
PurposeA pure small-bore enduro/offroad tool for trails, forest tracks and technical terrain, not built for road commuting or highway use.
Rider FitVery tall 910mm seat and 330mm ground clearance on a featherweight 83kg chassis; long-travel forks and knobby tires make it slim, spindly and demanding to flat-foot.
CharacterNimble, lightweight liquid-cooled two-stroke that revs eagerly and flicks through tight trails with playful, low-power enthusiasm.
Not Ideal ForNot for commuters, tourers, passengers, or anyone wanting road pace; short riders and highway riders should look elsewhere.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2009 Sherco SE 0.5 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 910mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2009 Sherco SE 0.5, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.