What category is the 2012 Piaggio Xevo 125?

General information
Category	Scooter
Model	Piaggio XEvo 125
Year	2012

Engine and Transmission Specifications
Emission details	Euro 3
Driveline	Automatic twist and go
Gearbox	Automatic
Cooling system	Liquid
Fuel control	SOHC
Fuel system	Carburettor
Valves per cylinder	4
Bore x stroke	57.0 x 48.6 mm (2.2 x 1.9 inches)
Compression	12.0:1
Torque	12.00 Nm (1.2 kgf-m or 8.9 ft.lbs) @ 8000
Power	14.75
Engine details	Piaggio LEADER 4 engine
Engine type	Single cylinder, four-stroke
Capacity:	124.00 ccm (7.57 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes diameter	240 mm (9.4 inches)
Rear brakes	Single disc
Front brakes diameter	260 mm (10.2 inches)
Front brakes	Single disc
Rear tyre dimensions	130/70-12
Front tyre dimensions	120/70-14
Rear suspension travel	90 mm (3.5 inches)
Rear suspension	Two dual-effect shock absorbers and four-position spring preload,
Front suspension travel	90 mm (3.5 inches)
Front suspension	35 mm tele-hydraulic fork,
Frame type	Steel tube double cradle

Physical measures and capacities
Reserve fuel capacity	1.80 litres (0.48 gallons)
Fuel capacity	12.00 litres (3.17 gallons)
Wheelbase	1,490 mm (58.7 inches)
Overall width	760 mm (29.9 inches)
Overall length	2,070 mm (81.5 inches)
Overall height	1,370 mm (53.9 inches)
Seat height	790 mm (31.1 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc	161.0 kg (354.9 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	Italian brand.
Factory warranty	3 years
Instruments	Analgue/LCD
Wheelbase	1,470 mm (57.9 inches)
Ground clearance	162 mm (6.4 inches)
Power/weight ratio	0.5909 HP/kg
Dry weight	198.0 kg (436.5 pounds)
Rear tyre	180/55-R17
Front tyre	120/70-R17
Rear wheel travel	150 mm (5.9 inches)
Rear Suspension	Single lateral shock absorber with fully adjustable pibby tank
Front wheel travel	150 mm (5.9 inches)
Front Suspension	Marzocchi upside-down fork
Trail	100 mm (3.9 inches)
Rake (fork angle)	24.5°
Exhaust system	Silencer, 3-way catalytic converter with oxygen sensor.
Clutch	Wet, multi-plate type
Transmission type,final drive	Chain
Lubrication system	Forced with trochoidal pump
Ignition	I.A.W. electronic
Valves per cylinder	4
Bore x Stroke	107.0 x 66.0 mm (4.2 x 2.6 inches)
Torque	102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 RPM
Color options	Black, blue
Seat	Two-person seat
Starter	Electric

Performance Profile & Rider Fit

15 hp

Peak Power

Best For

Track5%

City80%

Cornering40%

Daily Riding80%

Touring60%

Passenger65%

Rider Profile

Best For	Suitable for new and experienced riders alike thanks to its simple automatic twist-and-go operation.
Purpose	Designed as a practical maxi-scooter for commuting and light touring rather than outright performance.
Rider Fit	Low seat height and light overall weight make it easy to handle for riders of most sizes.
Character	A comfortable, unhurried, and easygoing companion for everyday urban and suburban riding.
Not Ideal For	Not suited for riders seeking high-speed thrills, off-road capability, or aggressive sport handling.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2012 Piaggio Xevo 125 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 790mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2012 Piaggio Xevo 125, with a moderate knee angle of around 105 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →