What category is the 2010 Piaggio Liberty 50?

General information
Year	2010
Engine and Transmission Specifications
Clutch	Dry automatic centrifugal type
Gearbox	Automatic
Cooling system	Air
Lubrication system	Wet sump
Starter	Electric & kick
Bore x stroke	40.0 x 39.3 mm (1.6 x 1.5 inches)
Compression	10.3:1
Stroke	2
Engine type	Single cylinder
Capacity:	49.40 ccm (3.01 cubic inches)

Physical measures and capacities
Wheelbase	1,330 mm (52.4 inches)
Overall width	670 mm (26.4 inches)
Overall length	1,900 mm (74.8 inches)
Seat height	775 mm (30.5 inches) If adjustable, lowest setting.
Dry weight	87.0 kg (191.8 pounds)
Piaggio Liberty 50 dimensions and frame
Rear brakes diameter	140 mm (5.5 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	220 mm (8.7 inches)
Front brakes	Single disc. calliper with opposed pistons
Rear tyre dimensions	110/80-14
Front tyre dimensions	90/80-16
Rear suspension travel	83 mm (3.3 inches)
Rear suspension	Hydraulic monoshock, 83 mm travel
Front suspension travel	76 mm (3.0 inches)
Front suspension	Telescopic fork, 76 mm travel
Frame type	Steel tubes
Speed and acceleration
Fuel capacity	6.00 litres (1.59 gallons)

Category	Scooter
Model	Piaggio Liberty 50
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

4.2 hp

Peak Power

Best For

Track5%

City90%

Cornering40%

Daily Riding80%

Touring15%

Passenger30%

Rider Profile

Best For	This is an ideal machine for new riders or those wanting simple, low-stakes twist-and-go transport.
Purpose	Built purely for short urban hops, errands, and commuting rather than any kind of performance riding.
Rider Fit	Its low seat height and light 95 kg weight make it easy to manage for riders of almost any size or strength.
Character	A friendly, unintimidating little scooter that prioritizes ease of use and maneuverability over speed or excitement.
Not Ideal For	This is not the bike for highway touring, carrying a passenger comfortably, or anyone seeking real performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Piaggio Liberty 50 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 775mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Piaggio Liberty 50, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →