What category is the 2010 Piaggio Fly 150?

General information
Category	Scooter
Model	Piaggio Fly 150
Year	2010
Engine and Transmission Specifications
Starter	Electric & kick
Fuel control	SOHC
Valves per cylinder	2
Fuel system	Carburettor
Bore x stroke	62.2 x 48.6 mm (2.4 x 1.9 inches)
Compression	10.7:1
Torque	11.60
Power	8.50
Stroke	4
Engine type	Single cylinder
Capacity:	151.00 ccm (9.21 cubic inches)
Physical measures and capacities
Wheelbase	1,330 mm (52.4 inches)
Overall length	1,870 mm (73.6 inches)
Seat height	785 mm (30.9 inches) If adjustable, lowest setting.
Dry weight	112.0 kg (246.9 pounds)

Piaggio Fly 150 dimensions and frame
Rear brakes diameter	140 mm (5.5 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	200 mm (7.9 inches)
Front brakes	Single disc
Rear tyre dimensions	120/70-12
Front tyre dimensions	120/70-12

Speed and acceleration
Power/weight ratio	0.0759 HP/kg
Top speed	98.0 km/h (60.9 mph)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Reserve fuel capacity	1.20 litres (0.32 gallons)
Fuel capacity	7.20 litres (1.90 gallons)

Performance Profile & Rider Fit

11.4 hp

Peak Power

60.9 mph

Top Speed

Best For

Track5%

City88%

Cornering45%

Daily Riding80%

Touring20%

Passenger30%

Rider Profile

Best For	This scooter suits complete beginners and anyone who wants simple, low-stress twist-and-go transportation.
Purpose	It is built for short urban commutes, errands, and weaving through city traffic rather than any kind of performance riding.
Rider Fit	Its low seat height, light weight, and automatic CVT transmission make it extremely easy to handle for riders of almost any size or strength.
Character	It has a friendly, unintimidating, practical personality focused on efficiency and ease of use rather than excitement.
Not Ideal For	It is not for highway touring, high-speed riding, carrying a passenger over distance, or anyone seeking off-road capability or thrilling performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Piaggio Fly 150 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 785mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Piaggio Fly 150, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →