What category is the 2011 Peugeot Tweet 50?

General information
Year	2011
Engine and Transmission Specifications
Transmission type,final drive	Shaft drive (cardan)
Gearbox	Automatic
Cooling system	Air
Fuel system	Carburettor
Engine type	Single cylinder, two-stroke
Capacity:	49.90 ccm (3.04 cubic inches)


Category	Scooter
Model	Peugeot Tweet 50

Brakes, suspension, Frame and wheels
Rear brakes diameter	130 mm (5.1 inches)
Rear brakes	Expanding brake (drum brake)
Front brakes diameter	226 mm (8.9 inches)
Front brakes	Single disc
Rear tyre dimensions	90/80-16
Front tyre dimensions	90/80-16
Rear suspension	Hydraulic monshock
Front suspension	Telescopic fork, 300mm
Physical measures and capacities
Wheelbase	1,330 mm (52.4 inches)
Overall width	690 mm (27.2 inches)
Overall length	2,000 mm (78.7 inches)
Seat height	800 mm (31.5 inches) If adjustable, lowest setting.
Dry weight	100.0 kg (220.5 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Black, silver, gray
Starter	Electric

Performance Profile & Rider Fit

3.5 hp

Peak Power

Best For

Track2%

City90%

Cornering30%

Daily Riding75%

Touring10%

Passenger20%

Rider Profile

Best For	This is an ideal machine for beginners, learners, or anyone with a basic moped license, requiring minimal prior riding skill.
Purpose	Built purely for short-distance urban commuting and running errands around town, not for speed or distance.
Rider Fit	Its low seat height and light 100kg weight make it very easy to handle and manage for riders of nearly any size or strength.
Character	A practical, unassuming, and economical little scooter whose character is defined by convenience and fuel efficiency rather than excitement.
Not Ideal For	This is not suited for riders seeking highway travel, high speed, passenger comfort over distance, or any kind of touring or off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2011 Peugeot Tweet 50 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 800mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2011 Peugeot Tweet 50, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →