What category is the 2018 Nipponia Miro 130?

General information
Category	Scooter
Model	Nipponia Miro 130
Year	2018
Engine and Transmission Specifications
Emission details	Euro III
Driveline	CVT/Automatic
Transmission type,final drive	Belt
Gearbox	Automatic
Cooling system	Air
Ignition	CDI
Fuel control	SOHC
Fuel system	Carburettor
Bore x stroke	52.4 x 57.8 mm (2.1 x 2.3 inches)
Compression	9.2:1
Top speed	80.0 km/h (49.7 mph)
Torque	8.00 Nm (0.8 kgf-m or 5.9 ft.lbs) @ 6500
Power	9.00
Engine type	Single cylinder, four-stroke
Capacity:	129.00 ccm (7.87 cubic inches)
Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Front brakes	Single disc
Rear tyre dimensions	3.50-10
Front tyre dimensions	3.50-10
Rear suspension	Double hydraulic shock absorbers
Front suspension	Telescopic, hydraulic fork

Physical measures and capacities
Fuel capacity	5.70 litres (1.51 gallons)
Wheelbase	1,260 mm (49.6 inches)
Overall width	670 mm (26.4 inches)
Overall length	1,940 mm (76.4 inches)
Overall height	1,110 mm (43.7 inches)
Seat height	670 mm (26.4 inches) If adjustable, lowest setting.
Power/weight ratio	0.0833 HP/kg
Dry weight	108.0 kg (238.1 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Red, Black, White, Silver, Grey
Starter	Electric & kick

Performance Profile & Rider Fit

7.5 hp

Peak Power

49.7 mph

Top Speed

Best For

Track5%

City85%

Cornering40%

Daily Riding75%

Touring10%

Passenger30%

Rider Profile

Best For	This scooter suits complete beginners and anyone wanting simple, low-stress transportation with no gear shifting to worry about.
Purpose	It's built for short urban hops, running errands, and commuting through congested streets rather than any kind of performance riding.
Rider Fit	The low 670mm seat height and light 107kg weight make it easy to handle for riders of almost any size or strength, including smaller or less experienced riders.
Character	It has a practical, unpretentious personality focused on economy, ease of use, and getting around town without fuss.
Not Ideal For	This is not for riders seeking highway speed, long-distance touring comfort, passenger capability, or any off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2018 Nipponia Miro 130 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 670mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2018 Nipponia Miro 130, with a cramped knee angle of around 85 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →