Modenas Kriss MR3 - 2024 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryUnderbone
Year2024
ModelModenas Kriss MR3
 
 

Engine and Transmission Specifications

Gearbox4-speed
Torque6.7 Nm
Power6.6 HP
Cooling systemAir
Engine typeSingle cylinder, four-stroke
Capacity:107.0 ccm (6.53 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakesExpanding brake (drum brake)
Front brakesExpanding brake (drum brake)

Physical measures and capacities

Seat height760 mm (29.9 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc98.0 kg (216.1 pounds)
Fuel capacity4.50 litres (1.19 US gallons)
Ground clearance145 mm (5.7 inches)
Overall height1185 mm (46.7 inches)
Overall width685 mm (27.0 inches)
Overall length1868 mm (73.5 inches)
Wheelbase1235 mm (48.6 inches)
 
 

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
CommentsBudget Malaysian commuter, disc brake variant also offered.
StarterKick

Performance Profile & Rider Fit

6.6 hp
Peak Power

Best For

Track5%
City85%
Cornering55%
Daily Riding75%
Touring15%
Passenger20%

Rider Profile

Best ForIdeal for absolute beginners and new riders who want a light, unintimidating machine to learn the basics of clutchless gear shifting and traffic navigation.
PurposeBuilt purely as an economical, low-cost underbone commuter for short urban and rural trips rather than performance or leisure riding.
Rider FitExtremely light and low at 98 kg with a low seat height, making it very manageable for smaller or less physically strong riders.
CharacterA humble, no-frills workhorse that favors frugality and reliability over excitement, with kick-start simplicity underscoring its budget-focused nature.
Not Ideal ForNot suitable for highway travel, long-distance touring, carrying a passenger comfortably, or riders seeking any real sense of speed or thrill.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2024 Modenas Kriss MR3 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 760mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2024 Modenas Kriss MR3, with a moderate knee angle of around 110 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.