What category is the 2020 Kymco K-Pipe 125?

General information
Category	Naked bike
Model	Kymco K-Pipe 125
Year	2020
Engine and Transmission Specifications
Emission details	Meets current EPA standards. Models sold in California meet current CARB Ë†standards and may differ slightly due to emissions equipment.
Transmission type	Chain (final drive)
Gearbox	4-speed
Cooling system	Air
Fuel control	Single Overhead Cams (SOHC)
Fuel system	Carburettor
Bore x Stroke	54.0 x 54.0 mm (2.1 x 2.1 inches)
Compression	8.6:1
Torque	8.5 Nm (0.9 kgf-m or 6.3 ft.lbs) @ 6000 RPM
Power	8.0 HP (5.8 kW) @ 7000 RPM
Engine type	Single cylinder, four-stroke
Capacity:	125.0 ccm (7.63 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Diameter	276 mm (10.9 inches)
Front brakes	Single disc. Twin-piston
Rear tire	3.50-17
Front tire	2.75-17
Rear Suspension	Mono Shock
Front Suspension	Telescopic Forks
Frame type	Tubular Steel

Physical measures and capacities
Fuel capacity	4.54 litres (1.20 US gallons)
Wheelbase	1290 mm (50.8 inches)
Overall width	940 mm (37.0 inches)
Overall length	1941 mm (76.4 inches)
Overall height	1049 mm (41.3 inches)
Seat height	838 mm (33.0 inches) If adjustable, lowest setting.
Power/weight ratio	0.0722 HP/kg
Dry weight	110.9 kg (244.4 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Comments	Kymco is made by Kwang Yang Motor Company, Taiwan.
Factory warranty	2 - Year Factory Warranty, extended coverage available with KYMCO extended protection plan.
Starter	Electric & kick
Color options	Red/Black

Performance Profile & Rider Fit

8 hp

Peak Power

Best For

Track10%

City85%

Cornering55%

Daily Riding65%

Touring15%

Passenger20%

Rider Profile

Best For	This is an ideal machine for beginners, new licence holders, or anyone wanting a light, unintimidating retro-styled runabout.
Purpose	Built for short urban hops, commuting, and casual cruising rather than any kind of serious speed or distance work.
Rider Fit	Its low seat height and very light dry weight make it easy to handle for shorter or less physically strong riders.
Character	A fun, minimalist, café-racer-styled small bike that prioritizes charm and manageability over performance.
Not Ideal For	It is not suited to highway touring, two-up riding, or any rider seeking real power and speed.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2020 Kymco K-Pipe 125 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 838mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with balls of both feet on the 2020 Kymco K-Pipe 125, with a relaxed knee angle of around 120 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →