What category is the 2012 KTM 690 Duke R?

General information
Category	Naked bike
Model	KTM 690 Duke R
Year	2012

Engine and Transmission Specifications
Exhaust system	Stainless steel underfloor silencer with integrated catalytic converter
Driveline	16:40. Primary drive: 36:79.
Clutch	APTC slipper clutch, hydraulically operated
Transmission type,final drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Lubrication system	Pressure lubrication with 2 Eaton pumps
Fuel control	OHC
Fuel system	Injection. Keihin EFI with EPT (Electric Power Throttle)
Bore x stroke	102.0 x 84.5 mm (4.0 x 3.3 inches)
Compression	12.5:1
Torque	70.00 Nm (7.1 kgf-m or 51.6 ft.lbs) @ 5500
Power	69.06
Engine type	Single cylinder, four-stroke
Capacity:	690.00 ccm (42.10 cubic inches)
Brakes, suspension, Frame and wheels
Wheels	Cast aluminium wheels 3.5 x 17in., 5 x 17in.
Rear brakes diameter	240 mm (9.4 inches)
Rear brakes	Single disc
Front brakes diameter	320 mm (12.6 inches)
Front brakes	Single disc
Rear tyre dimensions	160/60-R17
Front tyre dimensions	120/70-17
Rear suspension travel	140 mm (5.5 inches)
Rear suspension	WP mono shock with Pro-Lever linkage
Front suspension travel	140 mm (5.5 inches)
Front suspension	WP USD 48 mm (1.89 in)
Trail	115 mm (4.5 inches)
Rake (fork angle)	26.5°
Frame type	Chromium-Molybdenum trellis frame, powder coated. Subframe: Aluminium 7020.

Physical measures and capacities
Fuel capacity	13.50 litres (3.57 gallons)
Wheelbase	1,472 mm (58.0 inches)
Ground clearance	155 mm (6.1 inches)
Seat height	865 mm (34.1 inches) If adjustable, lowest setting.
Power/weight ratio	0.4666 HP/kg
Dry weight	148.0 kg (326.3 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Orange/black/white
Starter	Electric

Performance Profile & Rider Fit

75 hp

Peak Power

3.7s

0-60 mph

Best For

Track75%

City82%

Cornering92%

Daily Riding55%

Touring32%

Passenger20%

Rider Profile

Best For	Best suited to intermediate or experienced riders who can manage a punchy big-single with a light, flickable chassis.
Purpose	Built for aggressive backroad carving, supermoto-style street attacks, and tight, twisty riding rather than outright top-speed runs.
Rider Fit	Light dry weight and a tall-ish 865mm seat height suit riders of average-to-tall stature who want an upright, nimble stance.
Character	Raw, torquey, and characterful, with the visceral thump of a big single and sharp, minimal-mass handling.
Not Ideal For	Not ideal for riders wanting plush long-distance comfort, wind protection, or a smooth two-up touring experience.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2012 KTM 690 Duke R Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 865mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2012 KTM 690 Duke R, with a relaxed knee angle of around 135 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →