KTM 450 Rally Factory Replica - 2020 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelKTM 450 Rally Factory Replica
Year2020
 
 

Engine and Transmission Specifications

Transmission type,final driveChain
Gearbox6-speed
Cooling systemLiquid
IgnitionKeihin EMS
Fuel systemCarburettor
Bore x Stroke95.0 x 63.4 mm (3.7 x 2.5 inches)
Engine detailsTwo titanium intake valves plus two steel exhaust valves
Engine typeSingle cylinder, four-stroke
Capacity:449.30 ccm (27.42 cubic inches)

Brakes, suspension, Frame and wheels

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter260 mm (10.2 inches)
Front brakesSingle disc
Rear wheel travel335 mm (13.2 inches)
Rear SuspensionWP PDS shock absorber
Front wheel travel300 mm (11.8 inches)
Front SuspensionWP USD Ø 48 mm 4CS closed cartridge
Rake (fork angle)26.5°
Frame typeChrome-molybdenum steel central-tube
 
 

Physical measures and capacities

Wheelbase1,482 mm (58.3 inches)
Ground clearance345 mm (13.6 inches)
Seat height970 mm (38.2 inches) If adjustable, lowest setting.

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
StarterElectric & kick

Performance Profile & Rider Fit

Best For

Track30%
City20%
Cornering65%
Daily Riding15%
Touring55%
Passenger5%

Rider Profile

Best ForThis is a purpose-built rally raid machine that demands advanced, experienced offroad riders comfortable with a tall, aggressive, race-bred motorcycle.
PurposeBuilt as a genuine Dakar-style rally replica, it excels at high-speed desert navigation, long offroad stages, and rough terrain covered at pace rather than casual trail riding.
Rider FitThe tall 960mm seat height, 139kg dry weight, and long-travel suspension favor taller, fit riders with strong standing riding technique and core strength for extended stages.
CharacterIt has the character of a focused competition tool: raw, direct, minimal creature comforts, with a big fuel-carrying rally fairing and race-honed chassis feedback.
Not Ideal ForThis is not suited to new riders, city commuting, two-up touring, or anyone wanting a plush, low-maintenance daily bike.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2020 KTM 450 Rally Factory Replica Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 970mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2020 KTM 450 Rally Factory Replica, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.