What category is the 2018 Italjet Dragster 125?

General information
Category	Scooter
Model	Italjet Dragster 125
Year	2018

Engine and Transmission Specifications
Clutch	Centrifugal-automatic
Gearbox	Automatic
Cooling system	Liquid
Lubrication system	Separate mixer
Starter	Electric & kick
Ignition	CDI
Bore x stroke	55.0 x 125.0 mm (2.2 x 4.9 inches)
Power	14.47
Stroke	2
Engine type	Single cylinder
Capacity:	123.54 ccm (7.54 cubic inches)
Physical measures and capacities
Overall width	680 mm (26.8 inches)
Overall length	1,775 mm (69.9 inches)
Seat height	790 mm (31.1 inches) If adjustable, lowest setting.
Dry weight	107.0 kg (235.9 pounds)
Italjet Dragster 125 dimensions and frame
Exhaust system	Sports single exhaust system equipped with a choice of catalytic or non- catalytic exhaust.
Rear brakes	Single disc
Front brakes	Single disc
Rear tyre dimensions	130/60-13
Front tyre dimensions	120/70-11
Rear suspension	Single hydropneumatic shock absorber with adjustable spring
Front suspension	S.I.S. with single hydropneumatic shock absorber with adjustable spring
Frame type	Built with tubular grid structure, to increase rigidity, bending and torsion strength (improving handling and safety)
Speed and acceleration
Power/weight ratio	0.1352 HP/kg
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Color options	Yellow fluo, Racing blue,Ribes, Silver, Red, Black
Fuel capacity	11.00 litres (2.91 gallons)

Performance Profile & Rider Fit

12.5 hp

Peak Power

Best For

Track25%

City92%

Cornering70%

Daily Riding80%

Touring20%

Passenger35%

Rider Profile

Best For	Suits new and license-restricted riders, typically on a moped or A1-equivalent license, looking for a sporty first step into powered two-wheelers.
Purpose	Built for short, punchy urban trips and weaving through city traffic rather than long-distance travel or outright speed.
Rider Fit	Its low seat height, light weight, and automatic transmission make it very approachable for smaller or less experienced riders.
Character	A striking, aggressive-looking sport scooter with big wheels, premium suspension, and sharp handling that punches above its small-capacity class.
Not Ideal For	Not suited to riders wanting highway touring, long motorway stints, or high top-speed performance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2018 Italjet Dragster 125 Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 790mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2018 Italjet Dragster 125, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →