Husqvarna WR 250 - 2003 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelHusqvarna WR 250
Year2003

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox5-speed
Cooling systemLiquid
StarterKick
Fuel systemCarburettor
Bore x stroke66.4 x 72.0 mm (2.6 x 2.8 inches)
Stroke2
Engine typeSingle cylinder
Capacity:249.30 ccm (15.21 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,450 mm (57.1 inches)
Ground clearance370 mm (14.6 inches)
Seat height890 mm (35.0 inches) If adjustable, lowest setting.
Dry weight103.5 kg (228.2 pounds)

Husqvarna WR 250 dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter260 mm (10.2 inches)
Front brakesSingle disc
Rear tyre dimensions140/80-18
Front tyre dimensions90/90-21
 
 

Speed and acceleration

Fuel capacity11.20 litres (2.96 gallons)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track20%
City25%
Cornering55%
Daily Riding20%
Touring20%
Passenger5%

Rider Profile

Best ForThis bike suits intermediate to experienced off-road riders who are comfortable with tall suspension travel and a light, responsive chassis.
PurposeIt's built for enduro and trail riding, excelling on technical dirt, rocky trails, and demanding off-road terrain rather than pavement use.
Rider FitThe long-travel suspension and tall seat height demand good leg strength and rider fitness for standing control and maneuvering over obstacles.
CharacterIt has the character of a nimble, purpose-built dirt weapon, favoring agility and suspension compliance over outright power or comfort.
Not Ideal ForThis is not the right choice for riders wanting a comfortable highway tourer or a passenger-friendly daily commuter.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2003 Husqvarna WR 250 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 890mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2003 Husqvarna WR 250, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.