What category is the 2020 Husqvarna TX 300I?

The 2020 Husqvarna TX 300I has a Category of Enduro / offroad.

What is the engine size of the 2020 Husqvarna TX 300I?

The 2020 Husqvarna TX 300I has a Capacity: of 293.2 ccm (17.89 cubic inches).

What type of engine does the 2020 Husqvarna TX 300I have?

The 2020 Husqvarna TX 300I has a Engine type of Single cylinder, two-stroke.

Is the 2020 Husqvarna TX 300I air cooled or liquid cooled?

The 2020 Husqvarna TX 300I has a Cooling system of Liquid.

How many gears does the 2020 Husqvarna TX 300I have?

The 2020 Husqvarna TX 300I has a Gearbox of 6-speed.

What is the seat height of the 2020 Husqvarna TX 300I?

The 2020 Husqvarna TX 300I has a Seat height of 950 mm (37.4 inches) If adjustable, lowest setting..

Husqvarna TX 300I - 2020 Specifications and Reviews

Name: 2020 Husqvarna TX 300I
Brand: Husqvarna

The 2020 Husqvarna TX 300i is a two-stroke trail bike designed for off-road enthusiasts seeking lightweight agility and simplicity. Its electric starter, compact dimensions, and responsive handling make it ideal for beginners and intermediate riders tackling technical terrain. Known for its nimble character and dependable performance, it excels in tight trail conditions.

⇄ Compare against another bike 📅 All Years

2022

2021

2020

❮❯

Add/Upload pictures for this motorcycle

General information
Category	Enduro / offroad
Year	2020
Model	Husqvarna TX 300i
Engine and Transmission Specifications
Driveline	Constant mesh
Clutch	Wet, multi-disc clutch, Magura hydraulics
Transmission type	Chain (final drive)
Gearbox	6-speed
Cooling system	Liquid
Lubrication system	Mixture oil lubrication
Ignition	Kokusan EMS
Fuel control	Double Overhead Cams/Twin Cam (DOHC)
Fuel system	Carburettor. 38mm flat slide Mikuni TMX
Bore x Stroke	72.0 x 72.0 mm (2.8 x 2.8 inches)
Engine details	Reed valves, counter balancer shaft
Engine type	Single cylinder, two-stroke
Capacity:	293.2 ccm (17.89 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Single disc. Magura single-piston floating calliper
Diameter	260 mm (10.2 inches)
Front brakes	Single disc. Magura twin-piston floating calliper
Rear tire	140/90-18
Front tire	90/90-21
Rear wheel travel	300 mm (11.8 inches)
Rear Suspension	WP shock absorber with linkage
Front wheel travel	310 mm (12.2 inches)
Front Suspension	WP-USD Xplor 48 with preload adjuster
Trail	106 mm (4.2 inches)
Rake (fork angle)	26.5°
Frame type	25CrMo4 steel central-tube

Physical measures and capacities
Fuel capacity	8.50 litres (2.25 US gallons)
Wheelbase	1485 mm (58.5 inches)
Ground clearance	370 mm (14.6 inches)
Seat height	950 mm (37.4 inches) If adjustable, lowest setting.
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Factory warranty	2 Years
Starter	Electric
Color options	White/blue/yellow

Performance Profile & Rider Fit

Best For

Track20%

City15%

Cornering55%

Daily Riding10%

Touring10%

Passenger5%

Rider Profile

Best For	This is a competition-focused enduro machine best suited to intermediate and experienced off-road riders comfortable with a tall, light, aggressive two-stroke.
Purpose	Built for tight, technical enduro trails, cross-country racing, and demanding off-road terrain rather than any road-oriented use.
Rider Fit	The very low dry weight and tall 950 mm seat height reward an active, standing riding style but demand decent leg length and fitness for extended technical riding.
Character	A razor-sharp, high-strung two-stroke enduro weapon that thrives on quick throttle inputs, precise suspension feedback, and rider-driven momentum.
Not Ideal For	Not a good fit for riders wanting a comfortable commuter, a passenger-friendly bike, or anything resembling relaxed long-distance touring.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2020 Husqvarna TX 300I Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 950mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2020 Husqvarna TX 300I, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Shop This Bike

Find Parts for the Husqvarna TX 300I 2020 Find One For Sale

Rider Reviews

Total comments: 1

MotorcycleDB Review

The 2020 Husqvarna TX 300i is a powerful and versatile off-road motorcycle that delivers impressive performance and handling. With its 300cc 2-stroke engine, this bike offers plenty of torque and power, making it ideal for navigating challenging terrain. The lightweight and nimble chassis provide excellent agility and control, allowing riders to tackle tight corners and technical obstacles with ease. The TX 300i also features high-quality components such as WP XACT suspension and Brembo brakes, ensuring reliable and responsive performance in all conditions. Overall, the 2020 Husqvarna TX 300i is a top choice for riders looking for a high-performance off-road bike that can handle the toughest trails with confidence. The 2020 Husqvarna TX 300i is a top-performing off-road motorcycle that offers exceptional power and handling. With its 300cc 2-stroke engine and lightweight chassis, this bike delivers impressive torque and agility, making it well-suited for navigating challenging terrain. The TX 300i is also equipped with premium components such as WP XACT suspension and Brembo brakes, ensuring reliable and responsive performance in a variety of off-road conditions. Overall, the 2020 Husqvarna TX 300i is a standout choice for riders seeking a high-performance off-road motorcycle that excels in both power and control.