Husqvarna TE 610 ES - 2003 Specifications and Reviews

The 2003 Husqvarna TE 610 ES is a heavyweight enduro machine built for serious off-road adventurers seeking long-distance capability. Its large 576cc single-cylinder engine delivers strong low-end torque ideal for technical terrain, while the 9.1-liter fuel tank enables extended range. Best suited for experienced riders tackling challenging trails and expeditions.

2003
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
Year2003
ModelHusqvarna TE 610 ES
 
 

Engine and Transmission Specifications

Stroke4
Engine typeSingle cylinder
Capacity:576.30 ccm (35.17 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,505 mm (59.3 inches)
Seat height860 mm (33.9 inches) If adjustable, lowest setting.
Dry weight149.8 kg (330.3 pounds)

Husqvarna TE 610 ES dimensions and frame

Fuel capacity9.10 litres (2.40 gallons)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

5.5s
0-60 mph (est.)

Best For

Track30%
City45%
Cornering65%
Daily Riding40%
Touring35%
Passenger20%

Rider Profile

Best ForBest suited to intermediate or experienced riders comfortable with a tall, lightweight big-bore single that demands active input.
PurposeBuilt primarily as a serious offroad and enduro machine that can be licensed for occasional road use between trails.
Rider FitThe tall 860mm seat height and light dry weight favor taller or more athletic riders who can manage standing riding and rougher terrain.
CharacterA raw, purposeful single-cylinder enduro bike that rewards skillful, engaged riding over relaxed cruising.
Not Ideal ForNot a good fit for riders seeking plush comfort, high-speed touring capability, or an easy-to-manage low seat height.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2003 Husqvarna TE 610 ES Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 860mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with tip-toe one foot on the 2003 Husqvarna TE 610 ES, with a cramped knee angle of around 75 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.