Husqvarna CR 250 - 2003 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryCross / motocross
ModelHusqvarna CR 250
Year2003

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox5-speed
Cooling systemLiquid
StarterKick
Fuel systemCarburettor
Bore x stroke66.4 x 72.0 mm (2.6 x 2.8 inches)
Stroke2
Engine typeSingle cylinder
Capacity:249.50 ccm (15.22 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,453 mm (57.2 inches)
Ground clearance370 mm (14.6 inches)
Seat height910 mm (35.8 inches) If adjustable, lowest setting.
Dry weight100.5 kg (221.6 pounds)

Husqvarna CR 250 dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter260 mm (10.2 inches)
Front brakesSingle disc
Rear tyre dimensions110/90-19
Front tyre dimensions80/100-21

Speed and acceleration

Fuel capacity8.50 litres (2.25 gallons)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track55%
City10%
Cornering80%
Daily Riding12%
Touring8%
Passenger5%

Rider Profile

Best ForBest suited to experienced off-road or motocross riders comfortable with an aggressive, high-strung 2-stroke powerband.
PurposeBuilt as a pure motocross competition weapon for closed-course racing rather than general riding.
Rider FitTall seat height, minimal weight, and a peaky 2-stroke engine demand strong physical fitness and confident bike control.
CharacterRazor-sharp, explosive, and featherweight, this bike rewards aggressive riding with electrifying agility and acceleration on rough terrain.
Not Ideal ForNot for beginners, commuters, or anyone wanting a comfortable, low-maintenance, road-going motorcycle.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2003 Husqvarna CR 250 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 910mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2003 Husqvarna CR 250, with a cramped knee angle of around 80 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.