What category is the 2010 Honda CBR125R?

General information
Category	Sport
Model	Honda CBR125R
Year	2010
Engine and Transmission Specifications
Transmission typefinal drive	Chain
Gearbox	6-speed
Cooling system	Liquid
Starter	Electric
Ignition	Capacitor Discharge (CDI)
Fuel control	SOHC
Fuel system	Carburettor
Bore x stroke	58.0 x 47.2 mm (2.3 x 1.9 inches)
Compression	11.0:1
Torque	10.10
Power	13.00
Stroke	4
Engine type	Single cylinder
Capacity:	124.70 ccm (7.61 cubic inches)
Physical measures and capacities
Wheelbase	1,294 mm (50.9 inches)
Ground clearance	172 mm (6.8 inches)
Overall length	1,920 mm (75.6 inches)
Seat height	776 mm (30.6 inches) If adjustable, lowest setting.
Dry weight	115.0 kg (253.5 pounds)

Honda CBR125R dimensions and frame
Rear brakes diameter	220 mm (8.7 inches)
Rear brakes	Single disc
Front brakes diameter	276 mm (10.9 inches)
Front brakes	Double disc
Rear suspension	Monoshock damper, 120mm axle travel
Front suspension	31mm telescopic fork, 109mm axle travel
Speed and acceleration
Power/weight ratio	0.1130 HP/kg

Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Fuel capacity	10.00 litres (2.64 gallons)

Performance Profile & Rider Fit

13.1 hp

Peak Power

14.5s

0-60 mph

Best For

Track35%

City88%

Cornering60%

Daily Riding80%

Touring25%

Passenger30%

Rider Profile

Best For	This is an ideal machine for beginners, learner riders, and those new to motorcycling thanks to its light weight and gentle power delivery.
Purpose	It's built as a lightweight commuter and learner sportbike suited to city streets and light urban riding rather than outright performance.
Rider Fit	Its low seat height and slim, sub-140kg mass make it extremely manageable for shorter or less physically strong riders.
Character	The CBR125R has a nimble, approachable, and forgiving character with sporty styling but modest real-world urgency.
Not Ideal For	It's not for experienced riders seeking highway performance, long-distance touring comfort, or two-up passenger capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2010 Honda CBR125R Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 776mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2010 Honda CBR125R, with a cramped knee angle of around 65 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →