What category is the 2024 Genuine Scooter Buddy 170I?

General information
Category	Scooter
Model	Genuine Scooter Buddy 170i
Year	2024

Engine and Transmission Specifications
Driveline	Automatic, Variable Ratio
Clutch	Automatic
Transmission type	Belt (final drive)
Gearbox	Automatic
Cooling system	Air
Fuel system	Injection. EFI
Top speed	88.5 km/h (55.0 mph)
Engine type	Single cylinder, four-stroke
Capacity:	168.9 ccm (10.31 cubic inches)

Brakes, suspension, Frame and wheels
Rear brakes	Expanding brake (drum brake)
Front brakes	Single disc
Rear tire	100/90-10
Front tire	100/90-10
Rear Suspension	Monoshock
Front Suspension	Telescopic fork
Physical measures and capacities
Overall width	645 mm (25.4 inches)
Overall length	1778 mm (70.0 inches)
Overall height	1092 mm (43.0 inches)
Seat height	762 mm (30.0 inches) If adjustable, lowest setting.
Dry weight	110.2 kg (243.0 pounds)
Other specs
Maintenance	Find parts, fluids, filters, maintenance tools and service items on eBay
Factory warranty	24 months, unlimited mile
Starter	Electric
Color options	Brit Racing Green, Glossy Titanium, Matte Black, Mocha, Seafoam, Italia, Pamplona

Performance Profile & Rider Fit

11.2 hp

Peak Power

55 mph

Top Speed

Best For

Track5%

City90%

Cornering45%

Daily Riding80%

Touring15%

Passenger30%

Rider Profile

Best For	Ideal for beginners or anyone comfortable with a small, automatic scooter for low-speed urban riding.
Purpose	Built for short commutes, errands, and easy city puttering rather than any kind of performance riding.
Rider Fit	Its low seat height and light 107 kg wet weight make it very manageable for smaller or less physically strong riders.
Character	A friendly, economical little classic-styled scooter that prioritizes simplicity, fuel efficiency, and easy handling over speed.
Not Ideal For	Not suitable for highway travel, long-distance touring, or riders wanting real acceleration or passenger comfort.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2024 Genuine Scooter Buddy 170I Rider Ergonomics Assessment

Your height

Inseam (optional)

Units

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 762mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2024 Genuine Scooter Buddy 170I, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: estimated (wheelbase estimated from this category's typical bike, not this model's own spec). Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →