CCM RL 125 - 2011 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
ModelCCM RL 125
Year2011

Engine and Transmission Specifications

Transmission type,final driveChain
Cooling systemAir
Lubrication systemWet Sump
Fuel controlSOHC
Fuel systemCarburettor
Bore x stroke56.5 x 49.5 mm (2.2 x 1.9 inches)
Compression9.0:1
Engine typeSingle cylinder, four-stroke
Capacity:124.00 ccm (7.57 cubic inches)
 
 

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
Rear suspensionDouble Shock
Front suspensionTelescopic fork
Frame typeTubular welded steel. Steel swing arm.

Physical measures and capacities

Fuel capacity12.00 litres (3.17 gallons)
Wheelbase1,135 mm (44.7 inches)
Ground clearance220 mm (8.7 inches)
Seat height810 mm (31.9 inches) If adjustable, lowest setting.
Weight incl. oil, gas, etc138.0 kg (304.2 pounds)
Dry weight125.0 kg (275.6 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsRed, black
StarterElectric

Performance Profile & Rider Fit

10.1 hp
Peak Power

Best For

Track15%
City45%
Cornering40%
Daily Riding40%
Touring20%
Passenger15%

Rider Profile

Best ForThis is a friendly, low-intimidation machine well suited to beginners, learners, or riders returning to biking after time away.
PurposeIt's built for light green-lane trail riding, mixed dirt tracks, and short countryside jaunts rather than any kind of serious speed work.
Rider FitThe light dry weight and low-ish seat height keep it manageable for smaller or less experienced riders, though the 790mm seat still demands reasonable leg length for off-road standing and balance.
CharacterIt has the simple, torque-light, easygoing personality typical of an air-cooled 125cc single, favouring rideability and low maintenance over outright performance.
Not Ideal ForIt's not for experienced riders seeking highway speed, long-distance touring comfort, or a machine capable of carrying a passenger any real distance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2011 CCM RL 125 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 810mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2011 CCM RL 125, with a cramped knee angle of around 70 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.