Beta RR 50 Motard - 2009 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

General information

Year2009

Engine and Transmission Specifications

Clutchwet multi-disc clutch
Gearbox6-speed
Cooling systemLiquid
Lubrication systemMixing with mechanical pump, fuel 1,5% (with synthetic oil)
Fuel systemCarburettor. Dell´Orto PHBN 16 FS
Bore x stroke40.3 x 39.0 mm (1.6 x 1.5 inches)
Compression12.0:1
Stroke2
Engine typeSingle cylinder
Capacity:49.70 ccm (3.03 cubic inches)

Physical measures and capacities

Wheelbase1,325 mm (52.2 inches)
Ground clearance355 mm (14.0 inches)
Overall width800 mm (31.5 inches)
Overall length1,960 mm (77.2 inches)
Overall height1,120 mm (44.1 inches)
Seat height910 mm (35.8 inches) If adjustable, lowest setting.
Dry weight85.0 kg (187.4 pounds)
 
 

Beta RR 50 Motard dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter260 mm (10.2 inches)
Front brakesSingle disc
Rear tyre dimensions130/70-17
Front tyre dimensions110/80-17
Rear suspension travel285 mm (11.2 inches)
Rear suspensionMonoshock with adjustable spring preload
Front suspension travel230 mm (9.1 inches)
Front suspensionHydraulic fork with 36 mm shaft
Frame typesteel double cradle frame
 
 

Speed and acceleration

Reserve fuel capacity1.00 litres (0.26 gallons)
Fuel capacity6.00 litres (1.59 gallons)

CategorySuper motard
ModelBeta RR 50 Motard

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

Best For

Track55%
City70%
Cornering80%
Daily Riding40%
Touring15%
Passenger15%

Rider Profile

Best ForThis bike suits beginner to intermediate riders, including younger or smaller riders, who want a light, playful machine to build skills on.
PurposeIt's built for supermotard-style fun, sharp handling, and tight cornering rather than outright speed or distance travel.
Rider FitIts very low dry weight and tall but narrow stance make it easy to flick around, though the 910 mm seat height demands reasonable leg length or confidence for shorter riders.
CharacterExpect a nimble, high-revving two-stroke character that rewards an active riding style and loves being thrown into corners rather than cruising in a straight line.
Not Ideal ForIt is not suited to riders wanting high top speed, long-distance comfort, serious off-road capability, or the ability to comfortably carry a passenger.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2009 Beta RR 50 Motard Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 910mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2009 Beta RR 50 Motard, with a relaxed knee angle of around 140 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.